On order
Petronas Paraflu 11
Concentrated IAT coolant for heavy-duty engines, Fiat 9.55523 and Iveco 18-1830 approved
ASTM D 3306 Type I
Specifications
- Brand
- Petronas
- Category
- Antifreeze & additives
- Manufacturer code
- 76684
- Availability
- On order
Approved for
Compatible vehicles
- Chrysler
- Voyager
- Iveco
- Daily, Eurocargo, S-Way, Stralis
- Jeep
- Grand Cherokee
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour | Green Blue | |
| Relative density @15°Cg/cm³ | 1.072 | ASTM D 1122 |
| pH, 50% vol in DI Water | 7.8 | ASTM D 1287 |
| Reserve alkalinityml | 7.5 | ASTM D 1121 |
| Boiling point°C | 109 | ASTM D 1120 |
| Freezing point°C | -38 | ASTM D 1177 |
| Glassware Corrosion Test | PASS | ASTM D1384 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
PETRONAS Paraflu 11 Ready is a high-quality, ready-to-use conventional coolant delivering optimized performance and component durability for heavy-duty engine cooling systems. It is formulated with mono-ethylene glycol enhanced with a special Inorganic Acid corrosion inhibitor technology with nitrites, borates and silicates (IAT technology), free of phosphates and amines, and contains an aversive agent (bitrex). The coolant provides protection against overheating, frost and corrosion, with a freezing point of -38 °C and a boiling point of 109 °C straight from the container. Specifically developed for FCA and IVECO, it is also suitable for passenger cars and commercial vehicles where a conventional coolant technology is required. PETRONAS Paraflu 11 Ready is approved to Iveco 18-1830 and Fiat 9.55523, meets ASTM D 3306 Type 3, ASTM D 6210 Type 3-FF and CUNA 956-16, and reaches the Chrysler MS7170 performance level. Always consult the owner's manual to check the specifications for your vehicle.
Applications
- Formulated with Mono-Ethylene Glycol enhanced with a special Inorganic Acid corrosion inhibitor Technology with nitrites, borates and silicates (IAT Technology), free of phosphates and amines, it provides protection against overheating, frost and corrosion and aversive agent (bitrex). Specifically developed for FCA and IVECO, it is also suitable for passenger cars and commercial vehicles where a conventional coolant technology is required.
Standards & approvals
ASTM D 3306 Type III
ASTM D3306 Type 3 — prediluted coolant
Type 3 of ASTM D3306: a coolant supplied already diluted with demineralised water, ready to pour.
Chrysler MS-7170
Chrysler MS-7170 — coolant
Chrysler's specification for engine coolant used in its own vehicles.Source
ASTM D 6210 Type 3-FF
ASTM D6210 Type 3-FF — prediluted heavy-duty coolant
The prediluted, fully formulated variant of ASTM D6210 for heavy-duty diesel engines — the same liner cavitation protection, supplied ready to use.
CUNA NC 956-16
CUNA NC 956-16 — automatic transmission fluid
The CUNA category for automatic transmission fluids, the Italian counterpart of the DEXRON levels.
IVECO 18-1830
IVECO 18-1830 — engine coolant
IVECO's standard for ethylene-glycol-based engine coolant concentrate.Source
FCA 9.55523
FCA 9.55523 — long-life coolant
Fiat/FCA's specification for an ethylene-glycol-based long-life engine coolant for its own passenger cars.