Shell Morlina S2 B 150

Standards & approvals

• Danieli Standard Oil 6.124249.F

  Danieli 6.124249.F — steel plant lubricants

  Danieli's works standard listing the lubricants approved for its steel plant installations, by type and viscosity grade.

• DIN 51517-1 C

  Industrial gear oil – Tip C — DIN 51517, part 1

  Plain mineral lubricating oils without additives, for lightly loaded bearings and mechanisms.

• DIN 51517-2 CL

  Industrial gear oil CL — DIN 51517, part 2

  CL oils, additised against oxidation and corrosion but without extreme-pressure additives.

Specifications

Brand

Shell

Range

Shell Morlina

Category

Circulating & slideway oils

Viscosity

ISO VG 150

Manufacturer code

001D7810

Availability

On request

Typical characteristics

Manufacturer's description

Shell Morlina S2 B 150 (ISO VG 150) is a high-performance oil designed to provide excellent protection against oxidation and excellent water separation, for industrial bearings and circulating systems, or other industrial applications where extreme-pressure oils are not required. Typical viscosity is 150 mm²/s at 40 °C and 15 mm²/s at 100 °C, viscosity index 95, pour point -15 °C. The oil meets the Morgan Construction Company and Danieli requirements for bearing oils.

Applications

• Bearing lubricating oilSuitable for most plain and rolling element bearings in general industrial applications.
• Enclosed industrial gearsEnclosed gears under low or moderate loads, where oils with extreme-pressure properties are not required.

Performance & benefits

• Long service life – reduced maintenanceShell Morlina S2 B oils are formulated with an additive package that prevents rust and oxidation, ensuring outstanding performance and protection throughout the maintenance interval.
• Optimum wear and corrosion protectionShell Morlina S2 B helps extend the life of bearings and circulating systems through: - Very good water separation characteristics, which ensure that critical oil films are retained between heavily loaded components. - Good air release characteristics, to minimise cavitation and the associated damage to circulating pumps. - Help in protecting against corrosion, oxidation and emulsion formation, even in the presence of water.
• Maintaining system efficiencyShell Morlina S2 B oils are formulated with high-quality, solvent-refined base oils that promote good water separation and air release, ensuring proper lubrication of machines and systems.
• Morgan MORGOIL® Lubricant Specification New Oil (Rev. 1.1) (MORGOIL is a registered trademark of the Morgan Construction Company)

Fits

• Industrial plant & equipment