Petronas Mach 5 20W-50

Specifications

Brand

Petronas

Category

Engine oils

Viscosity

SAE 20W-50

Manufacturer code

70513

Availability

On order

Approved for

• Mercedes-Benz
• Volkswagen
• ACEA
• API
• SAE

Compatible vehicles

Mercedes-Benz

C-Class W202, E-Class W210, Vito W638

Volkswagen

Bora, Golf III, Golf IV, Passat B5, Polo III

Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.

Typical characteristics

Manufacturer's description

PETRONAS Mach 5 20W-50 is a multigrade lubricant for petrol and diesel engines, formulated to warrant total cleansing and protection of the engine. As an SAE 20W-50 multigrade oil, it provides a robust viscosity film for engines operating in warmer climates or under heavier loads, helping to keep internal components clean and protected from wear over the service life of the oil. Mach 5 20W-50 meets ACEA A3/B3, API SL/CF, MB 229.1 performance level and VW 505.00. Typical properties include a density of 0.893 g/cm³ at 15°C, a kinematic viscosity of 19.1 cSt at 100°C, a viscosity index of 130, a TBN of 7.4 mg KOH/g, a flash point above 200°C and a pour point below -27°C.

Applications

• It warrants total cleansing and protection of the engines.

Standards & approvals

• ACEA A3/B3

  ACEA A3/B3 oil sequence

  ACEA's sequence for petrol and light-duty diesel engines. A full-SAPS level on a fixed drain interval. No longer on ACEA's current list, but still specified by many engines on the road.Source

• API SL

  Petrol engine oil, API SL performance level

  API's service category for spark-ignition engines. Current category.Source

• API CF

  Diesel engine oil, API CF performance level

  API's service category for indirect-injection diesel engines, tolerant of higher-sulphur fuel. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source

• MB-Approval 229.1

  Mercedes-Benz passenger-car engine oil, entry level

  An early Mercedes-Benz approval for petrol and diesel passenger-car engine oils on a standard (non-extended) service interval, the base level below 229.3 and 229.5.

• VW 505 00

  VW 505 00 — diesel engine oil

  VW's standard for passenger-car diesel engine oils without unit-injector injection, on a fixed drain interval.

Packaging

• 1 L
• 200 L