On order
Eni OSO 150
Low-zinc anti-wear hydraulic oil with high filterability
ISO VG 150
Specifications
- Brand
- Eni
- Category
- Hydraulic oils
- Type
- Mineral oils
- Manufacturer code
- 002307
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | APM 27 |
| Density at 15°Ckg/m³ | 878 | ASTM D 4052 |
| Viscosity index | 105 | ASTM D 2270 |
| Flash point COC°C | 220 | ASTM D 92 |
| Pour point°C | -30 | ASTM D 97 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni OSO PM 46 is a special ashless, high quality hydraulic oil formulated with selected paraffinic base stocks treated with antirust, antioxidant and antiwear additives.
Applications
- Eni OSO PM 46 is a special ashless high quality hydraulic oils formulated with selected paraffinic base stocks treated with antirust, antioxidant and antiwear additives, as illustrated by typical test results: Vickers test (I-286-S) vane and ring wear: around 50 mg FZG (A 8,3/90), scuffing test: pass the 12th stage BUGGER test: 31 N/mm2; Expressly developed for the presses Müller Weingarten for stamping and shearing sheet steel. Its particularly balanced additivation makes it suitable also in presence of clutches in oil bath.
Performance & benefits
- Extremely good oxidation resistance even to high thermal stresses. Minimizes sludge and deposit formation
- Outstanding anticorrosion and antirust properties to inhibit the oxidation of internal surfaces of hydraulic circuits
- Good demulsibility. Prevent the formation of a stable emulsion between the oil and any water which enters the system through leakage or condensation
- Very high filterability, also in presence of water. It is suitable for very fine filters (3 micron)
Standards & approvals
AFNOR NF E 48-603 HM
NF E 48-603 type HM
Class HM of the French standard: an antiwear hydraulic oil, the French counterpart of DIN 51524-2 HLP.
BS 4231 HSD
BS 4231 class HSD — hydraulic viscosity grade
Class HSD of the British hydraulic fluid viscosity classification, sitting around ISO VG 46.
ISO 11158 HM
Hydraulic oil, type H HM — ISO 11158
The international standard for mineral hydraulic fluids; class HM is the antiwear oil, the ISO counterpart of DIN 51524-2 HLP.
DIN 51524-3 HVLP
Hydraulic oil HVLP — DIN 51524, part 3
Part 3 of the German hydraulic fluid standard: HVLP oils, with the same additive package as HLP but a high viscosity index, for systems working across a wide temperature range.