On order
Petronas Hydrocer 32
Standard anti-wear hydraulic oil for moderately stressed mobile and industrial systems
ISO VG 32
Specifications
- Brand
- Shell
- Category
- Hydraulic oils
- Manufacturer code
- 001D7740
- Availability
- On order
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| ISO viscosity grade | 46 | ISO 3448 |
| Fluid type (ISO classification) | HM | |
| Kinematic viscosity @40°CcSt | 46 | Astm D445 |
| Kinematic viscosity @100°CcSt | 6.7 | Astm D445 |
| Viscosity index | 97 | ISO 2909 |
| Density @15°Ckg/l | 0.873 | ISO 12185 |
| Flash point (COC)°C | 230 | ISO 2592 |
| Pour point°C | -15 | ISO 3016 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Shell Hydraulic S1 M 46 is an anti-wear hydraulic fluid that delivers cost-effective, optimum protection and performance in most industrial and mobile applications
Applications
- Industrial hydraulic systemsSuitable for a wide range of hydraulic applications found in industrial environments
- Shell Hydraulic S1 fluids can be used in mobile power transmission applications such as excavators and cranes. Operation under moderate duty cycles, except in environments with wide temperature variations. For special and demanding applications, the Shell Tellus product range offers superior system performance where fluid stress is high and ultra-fine filtration and control valves are used.
- DIN 51524 type HLP Part 2For the full list of approvals and recommendations, please consult your Shell representatives. Compatibility and miscibility
- CompatibilityShell Hydraulic M fluids are compatible with most types of hydraulic pump. Before use in hydraulic pumps containing silver-plated components, your Shell representatives should be consulted.
- Fluid compatibilityShell Hydraulic S1 M fluids are compatible with most mineral oil based hydraulic fluids. However, hydraulic fluids must not be mixed with other fluid types (e.g. environmentally acceptable or fire-resistant fluids).
- Compatibility with seal materials and paintsShell Hydraulic S1 M fluids are compatible with the seal materials and paints normally specified for use with mineral oils.
- Mobile hydraulic power transmission systems: Shell Hydraulic S1 fluids can be used in mobile power transmission applications such as excavators and cranes. Hydraulic S1 M 46
Performance & benefits
- Oil life: resists oxidation in the presence of air, water and copper, therefore offering good oil life and deposit control in hydraulic systems.
- Good anti-wear performance: formulated with anti-wear technology effective across the range of operating conditions, including low and severe high-load conditions, to protect components such as pumps.
- Good anti-foam and air-release properties, for effective control of foam in the system.
- Good water-separation properties, to resist water-in-oil emulsion formation and prevent pump damage.
Standards & approvals
ISO 11158 HM
Hydraulic oil, type H HM — ISO 11158
The international standard for mineral hydraulic fluids; class HM is the antiwear oil, the ISO counterpart of DIN 51524-2 HLP.
DIN 51524-2 HLP
Hydraulic oil HLP — DIN 51524, part 2
Part 2 of the German hydraulic fluid standard: HLP oils — mineral oils with oxidation, corrosion and antiwear additives. It is the most widely quoted reference in industrial hydraulics.