Shell Tellus Zinc Free S3 MX 68

Specifications

Brand

Shell

Category

Hydraulic oils

Viscosity

ISO VG 68

Manufacturer code

007A0711

Availability

On order

Approved for

• Bosch Rexroth
• Vickers
• Parker Denison

Typical characteristics

Manufacturer's description

Shell Tellus Zinc Free S3 MX hydraulic fluids are premium lubricants that utilise zinc free technology to provide outstanding protection and performance on most manufacturing and many mobile equipment operations.

Applications

• Manufacturing and industrial hydraulic systemsSuitable for a wide range of manufacturing and industrial applications where ISO HM type hydraulic fluids are recommended.
• Marine and mobile hydraulic systemsSuitable for marine and mobile applications where ISO HM type hydraulic fluids are recommended. For applications that experience wide temperature variations we recommend an ISO HV type hydraulic fluid, the Shell Tellus "V" products.
• Parker Denison (HF-0, HF-1 and HF-2) ISO 32,46,68
• Danfoss Vickers E-FDGN-TB002-E
• ISO 11158 (HM fluids)
• ASTM 6158 (HM mineral oils)
• GB 11118.1 L-HM (high pressure)
• Swedish Standard SS 15 54 34 AAM
• Bosch Rexroth Fluid Rating RDE 90245

Performance & benefits

• Long fluid life for maintenance savingShell Tellus Zinc Free S3 MX fluids offer an improved capability to extend fluid maintenance intervals and hence reduce equipment downtime through: An extended ASTM D943 TOST lifetime, with an oxidative stability that is designed for up to 7500 hours TOST life. Excellent resistance to breakdown in the presence of water and heat. These features provide extended maintenance capability without compromising protection or performance, even under severe operating conditions.
• Outstanding wear protectionAdvanced zinc free anti-wear additives provide protection over a wide range of conditions, including heavy duty operations. This protection has been demonstrated in tough industry standard hydraulic pump tests such as the Bosch Rexroth RFT-APU-CL pump test (RDE 90245 for ISO 32,46,68), Parker Denison (T6H20C for ISO 32,46,68) and Danfoss Vickers E-FDGN-TB002-E (35VQ25 for 32,46,68).
• Maintaining system efficiencyWet and dry filterability coupled with excellent water separation; air release and anti-foam performance help ensure system cleanliness supporting hydraulic system efficiency. Shell Tellus Zinc Free S3 MX hydraulic fluids at point of filling meet the DIN 51524 specification and report a maximum value of 21/19/16 measured to ISO 4406 industry standard test method. Fluid cleanliness reduces the potential for filter blocking, providing enhanced filter life and improved equipment protection.
• Low ecotoxicityShell Tellus Zinc Free S3 MX is proven to demonstrate a low ecotoxicity towards aquatic invertebrates, offering a lower environmental impact in comparison to many hydraulic fluids without low ecotoxicity test results. Low ecotoxicity performance of our finished fluid has been assessed across OECD and EPA methods: OECD 202 - Classified as "not harmful" to Daphnia magna and US EPA OPPTS 850.1035 - Classified as "not harmful" to marine mysid shrimp. When an Environmentally Acceptable Lubricant is required, in accordance with US EPA, ISO 15380 or EEL (EU Ecolabel), we recommend our Shell PANOLIN range.
• Low ecotoxicity Shell Tellus Zinc Free S3 MX is proven to demonstrate a low ecotoxicity towards aquatic invertebrates, offering a lower environmental impact in comparison to many hydraulic fluids without low ecotoxicity test results. Low ecotoxicity performance of our finished fluid has been assessed across OECD and EPA methods: OECD 202 -Classified as "not harmful" to Daphnia magna and US EPA OPPTS 850.1035 - Classified as "not harmful" to marine mysid shrimp. When an Environmentally Acceptable Lubricant is required, in accordance with US EPA, ISO 15380 or EEL (EU Ecolabel), we recommend our Shell PANOLIN range

Standards & approvals

• DIN 51524-2 HLP

  Hydraulic oil HLP — DIN 51524, part 2

  Part 2 of the German hydraulic fluid standard: HLP oils — mineral oils with oxidation, corrosion and antiwear additives. It is the most widely quoted reference in industrial hydraulics.

• Parker Denison HF-0

  Parker Denison HF-0 — hydraulic fluid, most severe level

  The most severe level of the Denison hydraulic fluid specification: the oil must pass the wear test on both a vane pump and a piston pump, dry and in the presence of water. HF-0 subsumes HF-1 and HF-2.

• Eaton E-FDGN-TB002-E

  Eaton E-FDGN-TB002-E — hydraulic fluids

  The Eaton technical bulletin listing the requirements for hydraulic fluids in Eaton and Vickers equipment, including the vane pump wear test.

• ISO 11158 HM

  Hydraulic oil, type H HM — ISO 11158

  The international standard for mineral hydraulic fluids; class HM is the antiwear oil, the ISO counterpart of DIN 51524-2 HLP.

• ASTM D 6158 HM

  ASTM D6158, type HM — antiwear hydraulic oil

  The American standard for mineral hydraulic oils of type HM, that is, oils with antiwear additives. It is the ASTM counterpart of DIN 51524-2 HLP and ISO 11158 HM.

• GB 11118.1 L-HM

  GB 11118.1 L-HM — hydraulic oil (China)

  The Chinese national standard for hydraulic fluids; class L-HM is the antiwear oil, with a high-pressure variant.

• SS 15 54 34 AM

  SS 15 54 34 — environmental requirements for hydraulic fluids (Sweden)

  The Swedish standard requiring high biodegradability, low aquatic toxicity, and that the finished fluid not be classified as environmentally hazardous. It is required near groundwater and drinking water sources; verified products appear on the "SP list".

• Bosch Rexroth RE 90245

  Bosch Rexroth RE 90245 — hydraulic fluid rating list

  Bosch Rexroth's list of hydraulic fluids rated for use in its own pumps and motors. A fluid is listed after passing wear testing on axial piston pumps.

• ISO 6743-4 HM

  ISO 6743-4 HM — anti-wear hydraulic oil

  The ISO lubricant family classification for anti-wear hydraulic oils (category HM), the ISO counterpart of DIN 51524-2 HLP.Source