Eni Blasia 150

Specifications

Brand

Eni

Category

Industrial gear oils

Type

Mineral oils

Viscosity

ISO VG 150

Manufacturer code

002702

Availability

On order

Approved for

• ISO
• DIN

Typical characteristics

Manufacturer's description

Eni Blasia 150 is a lubricant with EP characteristics for enclosed industrial gears, splash- or circulation-lubricated, subject to high mechanical and thermal loads and high speeds in the presence of sliding friction. Eni Blasia 150 can be used to lubricate other heavily loaded components such as couplings, screw drives and plain bearings at low speeds. It is also recommended for oil-spray lubrication systems.

Applications

• Eni Blasia 150 is a gear oil with EP characteristics for enclosed industrial gears lubricated with splash or circulation systems especially where high loads and temperatures, high speeds and sliding friction is present. Eni Blasia 150 can be also used to lubricate other heavily-loaded components such as couplings, transmission screws and low speed plain bearings. Suitable for use in oil-mist lubrication systems.

Performance & benefits

• Protection of lubricated components during operation thanks to a robust antiwear additive system
• Resistance to high operative temperatures (up to 100 °C) due to very good antioxidant properties
• Non-corrosive behaviour against gaskets and seals as well as metals such as steel, cast iron, copper and bronze
• Quick separation from water that could accidentally enter the system thanks to an outstanting demulsive capacity

Standards & approvals

• AIST/US Steel 224

  AIST 224 — EP gear oil for steel mills

  The AIST (Association for Iron & Steel Technology) requirement for non-leaded EP gear oils in steel plant equipment, carried over from the former U.S. Steel 224 specification.

• ISO 12925-1 CKD

  Industrial gear lubricant CKD — ISO 12925

  Class CKD of ISO 12925-1: a gear oil with the same additive package as CKC but greater thermal stability, for gear units running hot.

• Muller Weingarten DT 55 005 CLP

  Müller Weingarten DT 55 005 — CLP gear oil

  The works standard of press builder Müller Weingarten for CLP gear oils in its own equipment, with load-carrying requirements under shock loading.

• Danieli Standard n. 0.000.001 - Rev.15

  Danieli Standard 0.000.001 rev. 15 — general lubricant list

  Danieli's general list of lubricants recommended for rolling mills and steel plant machinery, revision 15. It groups products by CLP/L-CKC class and ISO VG grade.

• Fives Cincinnati P-77

  Fives Cincinnati P-77 — ISO VG 150 gear oil

  An approval number from the Fives Cincinnati list of fluids for use in its own machine tools. It covers extreme-pressure gear oils for machine tool drives.

• DIN 51517-3 CLP

  Industrial gear oil CLP — DIN 51517, part 3

  Part 3 of the German lubricating oil standard: class CLP, gear oils with extreme-pressure additives. It requires an FZG pass plus corrosion and ageing protection.

• David Brown S1.53.101

  David Brown S1.53.101 level — EP gear oil

  David Brown's specification for extreme-pressure gear oils in open and enclosed drives under heavy and shock loading. It overlaps DIN 51517-3 CLP and U.S. Steel 224.

• AGMA 9005-F16

  ANSI/AGMA 9005-F16 (2016)

  The current edition of the AGMA lubrication practice for enclosed industrial gear drives, replacing the 2002 E02 edition.

• AGMA 9005-E02

  ANSI/AGMA 9005-E02 (2002)

  The 2002 edition of the AGMA enclosed gear drive lubrication practice. Still widely quoted on datasheets although superseded by the 2016 F16 edition.

Fits

• Ships & vessels