On order
Eni Grease LCX 1.5/460
Synthetic NLGI 1.5 EP grease for heavily loaded low-speed gears
DIN 51825 KPHC1,5R-40
Specifications
- Brand
- Eni
- Category
- Industrial greases
- Type
- Lithium-complex greases
- Manufacturer code
- 004978
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour | gray/beige opaque | |
| Thickener type | litio complesso | |
| Consistency (NLGI Grade) | 2 | ASTM D 217 |
| Penetration at 60 double strokedmm | 280 | ASTM D 217 |
| Base oil type | sintetico | |
| Base oil viscosity at 40°Cmm²/s | 100 | ASTM D 7042 |
| Dropping point°C | 290 | ASTM D 566 |
| EMCOR Test in distilled Water | 0/0 | IP 220 |
| Copper corrosion | 1a | ASTM D 4048 |
| Timken OK loadlbs | >45 | ASTM D 2509 |
| Temperature range°C | -40/+160 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
The eni Grease LCX products are top-tier greases, formulated to meet the most severe lubrication demands across several industries: wind power, metallurgy, cement plants, paper machines and glassworks. eni Grease LCX 2/100 is an anti-wear grease of NLGI 2 consistency, formulated with a special ISO VG 100 synthetic base oil. It is recommended in particular for lubricating bearings and components running at high speeds, such as the electric motors for which long relubrication intervals are required. It is recommended for lubricating wind turbine generators. Recommended temperature range: -40 °C / +160 °C.
Applications
- Eni Grease LCX 2/100 is a lithium complex grease, formulated with synthetic base oil of viscosity ISO VG 100 that allow the grease to operate at very low temperatures. The particular combination of anti-wear, EP, anticorrosive and anti-oxidant additives guarantees excellent performance in severe operating conditions such as high loads and in presence of vibrations. In addition, the synthetic base gives a high thermal and oxidative stability over time, allowing a reduction of downtime cases and maintenance costs. Eni Grease LCX 2/100 is particularly suitable for the lubrication of bearings and parts operating at high speeds and requiring long lubrication intervals, as in the case of electric motors. Also indicated for the lubrication of organs operating at low temperatures such as wind turbine generators.
Performance & benefits
- Suitable for applications at high and low temperature thanks to the nature of the synthetic base and the very high dropping point
- Extension of service life and relubrication intervals, even in the presence of strong mechanical and thermal stresses
- Excellent adhesiveness and resistance to water washout. Can be used in humid environments and in the presence of water
- Good loads resistance
- High anti-rust and anti-corrosion protection and compatibility with all types of metals both ferrous and non-ferrous
Standards & approvals
DIN 51825 KPHC2P-40
Lubricating grease KPHC2P-40 — DIN 51825
A DIN 51825 grease designation: consistency, thickener/EP-additive letters and lowest service temperature are coded in "KPHC2P-40" (P = EP additives, F = solid additives, HC = special base oil, the digit is the NLGI grade, the following letter the upper temperature range, the final figure the lower service-temperature limit).
ISO 12924 L-XDEHB 2
Grease classification L-XDEHB 2 — ISO 12924
An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.