Specifications
- Brand
- Eni
- Category
- Industrial greases
- Type
- Calcium-based greases
- Manufacturer code
- 004640
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour | ivory | |
| Thickener type | anhydrous calcium | |
| Consistency (NLGI Grade) | 2 | ASTM D 217 |
| Penetration at 60 double strokedmm | 280 | ASTM D 217 |
| Base oil type | mineral | |
| Base oil viscosity at 40°Cmm²/s | 100 | ASTM D 7042 |
| Dropping point°C | 145 | ASTM D 566 |
| Oil separation% | <3 | ASTM D 1742 |
| EMCOR Test in distilled Watermin/max | 0/0 | IP 220 |
| EMCOR Test in sea Watermin/max | 0/0 | IP 220 |
| Water washout at 79°C%p | 1 | ASTM D 1264 |
| Water Spray Off% | 15 | ASTM D 4049 |
| Copper corrosion | 1b | ASTM D 130 |
| Starting Torque TestmNm | 653 | ASTM D 1478 |
| Running Torque Test -30°CmNm | 63 | ASTM D 1478 |
| Temperature range°C | -30/+110 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
eni GREASE PV 2 is an anhydrous calcium grease, slightly stringy and ivory in colour, recommended in particular for protecting and lubricating various components.
Applications
- Eni Grease PV 2 is an EP (Extreme Pressure), mineral, anhydrous calcium grease, light ivory coloured and smooth textured. Its outstanding protective and anticorrosive properties are such as to satisfy the requirements of the Nato Code G-460 specification as 'Grease Sea Water Resisting' and make it particularly suitable for protecting metal surfaces in wet and in marine or otherwise corrosive environments. The very good resistance to water washout allows its use in applications in contact with water without inconveniences. Eni Grease PV 2 is particularly recommended for the lubrication and protection of bearings, open gears, chains, wire ropes, mechanical components operating on boats, harbor cranes, water treatment and purification plants exposed to atmospheric agents and in marine environments.
Performance & benefits
- Outstanding corrosion protection in wet and marine environments
- Very high resistance to water washout
- Very good load carrying capacity
- High adhesiveness to the metallic surfaces
- Light ivory coloured grease
Standards & approvals
NATO Code G-460
NATO Code G-460 — grease
A NATO supply code identifying a general-purpose grease.
DEF STAN 91-34
DEF STAN 91-34 — sea-water-resisting grease
The UK Defence Standard for a sea-water-resisting grease used on naval and marine equipment.
ISO 12924 L-XCBHB 2
Grease classification L-XCBHB 2 — ISO 12924
An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.
DIN 51502 KPF2G-30
Lubricant designation KPF2G-30 — DIN 51502
The DIN 51502 short code "KPF2G-30": thickener/additive letters, NLGI consistency, upper temperature-range letter and lower service-temperature limit for a rolling/plain-bearing grease.