Specifications
- Brand
- Eni
- Category
- Industrial greases
- Type
- Lithium-based greases
- Manufacturer code
- 005250
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | smooth-textured | |
| Colour | yellow-brown | |
| Base oil type | mineral | |
| Base oil viscosity at 40°Cmm²/s | 220 | ASTM D 445 |
| Thickener type | lithium | |
| Consistency (NLGI Grade) | 1.5 | |
| Penetration at 60 double strokedmm | 300 | ASTM D 217 |
| Dropping point°C | 190 | ASTM D 566 |
| Temperature range°C | -20/+120 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni Litio Grease 475 is a special smooth-textured lithium grease. It is characterised by excellent adhesion and by mechanical and water washout resistance. Eni Litio Grease 475 is particularly suited to lubricating components working in dusty and humid environments, where strong adhesion is needed.
Applications
- Eni Litio Grease 475 is a special smooth-textured, stringy lithium-base grease. It is characterized by an excellent adhesiveness, mechanical and water wash-out resistance. Eni Litio Grease 475 is particularly suitable for the lubrication of components operating in dusty and humid environment and where a strong adhesiveness is required. Good pumpability.
Performance & benefits
- Very good adhesiveness to the metallic surfaces
- Excellent resistance to water washout
- Suitable to lubricate components operating in dusty environment
Standards & approvals
ISO 12924 L-XBCDA 1,5
Grease classification L-XBCDA 1,5 — ISO 12924
An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.
DIN 51825 K1,5K-20
Lubricating grease K1,5K-20 — DIN 51825
A DIN 51825 grease designation: consistency, thickener/EP-additive letters and lowest service temperature are coded in "K1,5K-20" (P = EP additives, F = solid additives, HC = special base oil, the digit is the NLGI grade, the following letter the upper temperature range, the final figure the lower service-temperature limit).