Specifications
- Brand
- Eni
- Category
- Industrial greases
- Type
- Other greases
- Manufacturer code
- 005249
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | smooth-textured | |
| Colour | light brown | |
| Base oil type | semi-synthetic | |
| Base oil viscosity at 40°Cmm²/s | 650 | ASTM D 445 |
| Thickener type | bentonite | |
| Consistency (NLGI Grade) | 1 | ASTM D 217 |
| Dropping point°C | no melting | ASTM D 566 |
| Penetration at 60 double strokedmm | 325 | ASTM D 217 |
| Oil separation% (m/m) | <3 | ASTM D 1742 |
| Temperature range°C | -10/+140 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
eni SILIS GREASE HTL 1 is a grease formulated with a carefully selected base oil and a special inorganic thickener, into which a synthetic polymer and additives are incorporated.
Applications
- Eni Silis Grease HTL 1 is a non-melting grease formulated with selected mineral and synthetic base oils and special inorganic thickener. Suitable for the lubrication of components operating at high temperature (peaks up to 150 ° C with appropriate regreasing intervals) for example for rolling bearings of continuous casting plants, hot rolling trains, cooling plates. Suitable where good pumpability and lack of hard carbon residues, that can hinder the movement of the lubricated parts, is required. Thanks to the presence of the synthetic component, Eni Silis Grease HTL 1 has a higher thermal and oxidation stability than normal infusible greases.
Performance & benefits
- Non melting grease suitable for high temperature applications
- Excellent adhesion,very high resistance to water washout
- Excellent mechanical and cutting stability
- Long-lasting grease thanks to the high thermal and oxidation stability of the synthetic component
Standards & approvals
ISO 12924 L-XADGA 1
Grease classification L-XADGA 1 — ISO 12924
An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.
DIN 51825 K1N-10
Lubricating grease K1N-10 — DIN 51825
A DIN 51825 grease designation: consistency, thickener/EP-additive letters and lowest service temperature are coded in "K1N-10" (P = EP additives, F = solid additives, HC = special base oil, the digit is the NLGI grade, the following letter the upper temperature range, the final figure the lower service-temperature limit).