Akros Gear EP90
EP 80W-90 oil for gearboxes and hypoid differentials of tractors, API GL-5
SAE 80W-90
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
| Property | Typical value | Method |
|---|---|---|
| Appearance | Bright & Clear | |
| Density @15°Cg/cm³ | 0,895 | ASTM D 4052 |
| Kinematic viscosity @100°Cmm²/s (cSt) | 14,5 | ASTM D 445 |
| Viscosity index | 100 | ASTM D 2270 |
| Flash point COC°C | 210 | ASTM D 92 |
| Pour point°C | -27 | ASTM D 97 |
We email you this product's sheets in a single archive.

PETRONAS Arbor TRW 90 is a high-quality SAE 80W-90 axle fluid dedicated to agricultural and construction machinery, able to keep it efficient while offering a longer service life - the right solution for high, long-lasting performance in hard daily work, protecting tireless machinery from loss of performance and unplanned downtime. This extreme-pressure lubricant is designed for the hypoid and non-hypoid gears of axles, differentials and final drives of tractors, farm machines and earthmoving equipment over their standard service life, and is recommended in transmissions requiring an API GL-5 level of performance. Its anti-wear, extreme-pressure (EP) and anti-pitting properties extend component life; good thermal and oxidation stability prevents deposits and sludge; and it offers good anti-rust and corrosion protection. Good low-temperature flow and significantly reduced axle noise round off the working experience. PETRONAS Arbor TRW 90 meets API GL-5, holds ZF TE-ML 05A, 12E, 16B, 17B, 19B and 21A approvals, and meets the MIL-L-2105D, NH 520 A, MS 1316 and SDFG OP-1705 performance levels. Typical data: viscosity 14.5 mm²/s at 100°C, viscosity index 100, flash point 210°C, pour point -27°C.
Gear oil, API GL-5 service level
API's service designation for axle and manual transmission oils.
Construction machinery axle oil (ZF class 05A)
ZF's list of admitted lubricants for ZF axles for construction machinery; class 05A is the specific lubricant level a given unit in this family requires.Source
Bus and truck axle oil (ZF class 12E)
ZF's list of admitted lubricants for ZF axles and wheel heads for buses and trucks; class 12E is the specific lubricant level a given unit in this family requires.Source
Rail-vehicle transmission oil (ZF class 16B)
ZF's list of admitted lubricants for ZF transmissions for rail vehicles; class 16B is the specific lubricant level a given unit in this family requires.Source
Lift-truck transmission and axle oil (ZF class 17B)
ZF's list of admitted lubricants for ZF transmissions and axles for lift trucks; class 17B is the specific lubricant level a given unit in this family requires.Source
Commercial-vehicle transfer-case oil (ZF class 19B)
ZF's list of admitted lubricants for ZF transfer and offset transmissions for commercial vehicles; class 19B is the specific lubricant level a given unit in this family requires.Source
Tractor axle oil (ZF class 21A)
ZF's list of admitted lubricants for ZF tractor axles, harvester transmissions and final drives; class 21A is the specific lubricant level a given unit in this family requires.Source
API GL-5 / MIL-L-2105D — EP axle oil
The performance level for extreme-pressure hypoid axle oils defined by the US military specification MIL-L-2105D, in practice equivalent to API GL-5.
Case axle/transmission oil, MS series
Case internal Material Standard (MS series) for tractor axle and transmission oil.Source
SDF Group (Same Deutz-Fahr) axle/gear oil specification
Internal SDF Group specification for EP 90 axle/gear oils for tractors.Source