Brand
Divinol
Type
Manual gearbox & axle oils
Primary standard
FMVSS 116 - DOT4
Manufacturer code
62170

Divinol Bremsflüssigkeit DOT 4

Synthetic DOT 4 brake fluid for hydraulic brake and clutch systems, FMVSS 116, ISO 4925

Specifications

Brand
Divinol
Manufacturer code
62170
Availability
On order

Typical characteristics

PropertyTypical valueMethod
Colour< 3,5DIN ISO 2049
Density/15°C1070 kg/lDIN EN ISO 12185

Complete documentation

We email you this product's sheets in a single archive.

Manufacturer's description

Divinol Bremsflüssigkeit DOT 4 is a high-quality synthetic brake fluid made especially for brake systems with drum and/or disc brakes for which a DOT 4 fluid is required. It is ideal for all hydraulic car brake and clutch systems, with the exception of systems designed to operate with mineral oil. The fluid offers good ageing stability, does not affect sealing materials and keeps corrosion to a minimum. Its high wet boiling point (above 155 °C, with a reflux boiling point above 250 °C) maintains a safe safety margin against vapour lock even after the fluid has absorbed moisture in service. It is miscible with all brake fluids that comply with the same requirements. Divinol Bremsflüssigkeit DOT 4 meets FMVSS 116 DOT 4, SAE J 1704 and ISO 4925, as listed by Divinol Romania.

Applications

  • Use in all hydraulic brake systems with drum and/or disk brakes for which synthetic brake fluids according to DOT 4 are required. Miscible with all brake fluids complying with the same requirements.

Performance & benefits

  • High-quality synthetic brake fluid especially made for use in brake systems with drum and/or disk brakes for which a brake fluid according to DOT 4 is required. Ideal for all hydraulic car-brake and clutch systems except for systems designed for operation with mineral oil
  • good ageing stability
  • does not affect sealing material
  • minimum corrosion
  • high wet boiling point

Standards & approvals

  • FMVSS 116 - DOT4

    FMVSS 116 DOT 4 — brake fluid

    The US federal safety regulation defining the DOT brake fluid levels. DOT 4 demands a high boiling point both dry and after the fluid has taken up water.

  • SAE J1704

    SAE J1704 — DOT 4 brake fluid

    The SAE standard for DOT 4 brake fluids, with a higher boiling point than DOT 3, particularly once the fluid has taken up water.

  • ISO 4925

    ISO 4925 — brake fluid (generic)

    The international standard for glycol-based brake and clutch fluids, cited here without a specific class number.

Where should the files go?

We send the archive to the address below.

What you get

    Fields marked with are required.