Divinol Synthogear Extra LS 75W-90

Specifications

Brand

Divinol

Category

Manual gearbox & axle oils

Viscosity

SAE 75W-90

Manufacturer code

52000

Availability

On order

Approved for

• DAF
• Iveco
• Mercedes-Benz
• MAN
• Scania
• ZF
• JCB

Compatible vehicles

Case

721F Wheel Loader

DAF

CF, XF

Iveco

S-Way, Stralis

John Deere

644E Wheel Loader, 744H Wheel Loader, 844J Wheel Loader

Mack

Anthem/Pinnacle/Granite drive axles and transmissions and transfer cases

MAN

Lion's City, TGL, TGM, TGS, TGX

Mercedes-Benz

C-Class W202, E-Class W210, S-Class W140

Meritor

single- and tandem-drive axles on European heavy trucks and trailers

Scania

G-series, P-series, R-series

Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.

Typical characteristics

Manufacturer's description

Divinol Synthogear Extra LS 75W-90 (Art. No. 52000) is a high-performance limited-slip (LS) gear oil – a multifunctional gearbox oil for the rear axles and final drives of passenger cars and for certain vehicle gearboxes. It stands out for an unusually wide operating temperature range, optimum viscosity-temperature behaviour, high wear protection and excellent oxidation stability. Typical applications are the rear axles and final drives of commercial and private vehicles – including those fitted with limited-slip differentials – as well as certain gearboxes where an API GL-4 / GL-5 LS oil is specified. Divinol Synthogear Extra LS 75W-90 meets API GL-4 / GL-5 LS and MIL-L-2105D / PRF-2105E and covers the performance requirements of MAN 341 E2, MAN 341 Z2, MAN 342 M2, Arvin Meritor 0-76-N, DAF, Iveco, MB-Approval 235.0, Mack GO-J, Scania STO 1:0, JCB-Standard 4000/3900 and ZF TE-ML 02B/05A/07A/08/12L/12M/16B/16C/16D/17B/19B/21A (Divinol Romania lists ZF TE-ML 05C/12C/16E).

Applications

• Divinol Synthogear Extra LS 75W-90 is e.g. for rear axles and final drives of commercial & private vehicles and certain gearboxes.

Performance & benefits

• Divinol Synthogear Extra LS 75W-90 is a high-performance LS oil, multifunctional gearbox oil for the rear axles and final drives of passenger cars and for certain vehicles gearboxes. This product has an unusually wide operating temperature range
• optimum viscosity–temperature behaviour
• high wear protection
• excellent oxidation stability

Standards & approvals

• API GL-4

  Gear oil, API GL-4 service level

  API's service designation for axle and manual transmission oils.

• API GL-5

  Gear oil, API GL-5 service level

  API's service designation for axle and manual transmission oils.

• MIL-L-2105 D

  API GL-5 / MIL-L-2105D — EP axle oil

  The performance level for extreme-pressure hypoid axle oils defined by the US military specification MIL-L-2105D, in practice equivalent to API GL-5.

• MIL-PRF-2105E

  MIL-PRF-2105E — EP gear and axle oil

  The revised issue of the US military EP gear oil specification, which added seal compatibility requirements. Superseded by SAE J2360.

• MAN 341 Typ E2

  MAN 341 Typ E2 — manual gearbox/axle gear oil

  MAN's approval class E2 for gear oils in manual and automated-manual truck gearboxes and axle drives.Source

• MAN 341 Typ Z2

  MAN 341 type Z2 — gearbox oil

  Type Z2 of the MAN 341 list for manual gearbox oils, with in-house synchroniser protection requirements.

• MAN 342 Typ M2

  MAN 342 type M2 — axle oil

  Type M2 of the MAN 342 list, with tighter rear-axle thermal stability requirements than M1.

• Arvin Meritor 0-76-N

  Meritor O-76-N — axle lubricant

  The Meritor specification for axle lubricants in the O-76 series; the trailing letter gives the performance level and base oil, N being one of the synthetic extended-drain levels.

• MB-Approval 235.0

  Mercedes-Benz general-purpose gear oil

  Mercedes-Benz's approval for general-purpose gear oils used across manual gearboxes, axles and other driveline units.

• Mack GO-J

  Mack GO-J — axle/hypoid gear oil

  Mack's specification for hypoid gear oils used in truck axles and heavily-loaded manual transmissions.Source

• Scania STO 1:0

  Scania STO 1:0 — transmission and axle oil

  Scania's works standard for the oils in its own gearboxes and axles, with synchroniser and hypoid gear protection requirements.

• JCB Standard 4000/3900

  JCB Standard 4000/3900 — gear oil

  A JCB gear-oil standard for its construction equipment.Source

• ZF TE-ML 05C

  Construction machinery axle oil (ZF class 05C)

  ZF's list of admitted lubricants for ZF axles for construction machinery; class 05C is the specific lubricant level a given unit in this family requires.Source

• ZF TE-ML 12C

  Bus and truck axle oil (ZF class 12C)

  ZF's list of admitted lubricants for ZF axles and wheel heads for buses and trucks; class 12C is the specific lubricant level a given unit in this family requires.Source

• ZF TE-ML 16E

  Rail-vehicle transmission oil (ZF class 16E)

  ZF's list of admitted lubricants for ZF transmissions for rail vehicles; class 16E is the specific lubricant level a given unit in this family requires.Source

• ZF TE-ML 02B

  Manual/automated truck, bus and van gearbox oil (ZF class 02B)

  ZF's list of admitted lubricants for Manual and automated ZF transmissions for trucks, buses, light commercial and special vehicles; class 02B is the specific lubricant level a given unit in this family requires.Source