On order
Petronas Tutela Axle 300 LS 80W-90
EP oil for axles and limited-slip differentials, API GL-5, ZF TE-ML 05C/21C approved
SAE 80W-90
Specifications
- Brand
- Eni
- Category
- Manual gearbox & axle oils
- Type
- Manual transmission oils
- Viscosity
- SAE 80W-90
- Manufacturer code
- 001273
- Availability
- On order
Approved for
Compatible vehicles
- Case
- 721F Wheel Loader, Quadtrac CVX, Steiger CVX
- Claas
- Xerion
- John Deere
- 644E Wheel Loader, 744H Wheel Loader, 844J Wheel Loader
- MAN
- Lion's City
- New Holland
- T9
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Density at 15°Ckg/m³ | 901 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 13.9 | ASTM D 445 |
| Viscosity at 40°Cmm²/s | 124.1 | ASTM D 445 |
| Viscosity index | 105 | ASTM D 2270 |
| Viscosity at -26°CmPa·s | 135000 | ASTM D 2983 |
| Flash point COC°C | 215 | ASTM D 92 |
| Pour point°C | -33 | ASTM D 5950 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
eni Rotra MP/S 80W-90 is a special gear lubricant with EP (extreme pressure) and anti-stick-slip characteristics. It is recommended for lubricating the hypoid gearing of plated limited-slip differentials, and for oil-immersed brakes and clutches.
Applications
- Eni Rotra MP/S 80W-90 is a special lubricant for gears with special E.P. (Extreme Pressure) and anti stick-slip characteristics, which makes it suitable for lubrication of the hypoid gears in limited slip differentials and of axles with wet brakes and clutches.
Performance & benefits
- The special E.P. additivation used in this product guarantees the continuity of the lubrication film even when the gears are operated under particularly heavy and dynamic impulse loads with very high and intermittent sliding speeds between the teeth
- The anti-slip additive contained in the product can modify the friction coefficient to prevent vibration phenomena in the clutch mechanism of the limited slip differential and in the oil immersed brakes used in the tractors
- The anti-wear properties and strong greasiness considerably help to reduce the wear of gears and bearings
- The particular oxidation stability avoids oil deterioration in parts operating at high temperature and effectively counteracts the tendency to increase viscosity and sludge formation
- The strong anti-rust properties protect the gears and supports even in the presence of moisture
- The strong anti-foam additivation conferred on the lubricant eliminates the negative consequences that excessive formation of foam would cause with regard to the continuity of the lubricant film
Standards & approvals
API GL-5
Gear oil, API GL-5 service level
API's service designation for axle and manual transmission oils.
ZF TE-ML 05C
Construction machinery axle oil (ZF class 05C)
ZF's list of admitted lubricants for ZF axles for construction machinery; class 05C is the specific lubricant level a given unit in this family requires.Source
ZF TE-ML 12C
Bus and truck axle oil (ZF class 12C)
ZF's list of admitted lubricants for ZF axles and wheel heads for buses and trucks; class 12C is the specific lubricant level a given unit in this family requires.Source
ZF TE-ML 16E
Rail-vehicle transmission oil (ZF class 16E)
ZF's list of admitted lubricants for ZF transmissions for rail vehicles; class 16E is the specific lubricant level a given unit in this family requires.Source
ZF TE-ML 21C
Tractor axle oil (ZF class 21C)
ZF's list of admitted lubricants for ZF tractor axles, harvester transmissions and final drives; class 21C is the specific lubricant level a given unit in this family requires.Source