Brand
Petronas
Type
Manual gearbox & axle oils
Primary standard
API GL-5
Manufacturer code
77496

Tutela Axle 900 EHD

Synthetic 75W-85 oil for heavy-duty axles with extended drains, API GL-5/MT-1, SAE J2360

Specifications

Manufacturer code
77496
Availability
On order

Approved for

Compatible vehicles

Iveco
Eurocargo

Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.

Typical characteristics

PropertyTypical valueMethod
AppearanceBright & Clear
Density @ 15°Cg/cm³0.870ASTM D 4052
Kinematic viscosity @ 100°Cmm²/s (cSt)12,2ASTM D 445
Viscosity index176ASTM D 2270
Brookfield Viscosity @ -40°CmPa.s (cP)47000ASTM D 2983
Pour point°C-45ASTM D 97
Flash point COC°C212ASTM D 92

Complete documentation

We email you this product's sheets in a single archive.

Manufacturer's description

PETRONAS Tutela Axle 900 EHD 75W-85 is a synthetic axle fluid delivering extended drain intervals and total protection, even in the most severe conditions, for today's axles, transaxles, differentials and final drives over their entire service life. It is especially recommended for heavy-duty axles requiring SAE J2360 or API GL-5/MT-1 performance. The fluid has been developed to meet the latest efficiency demands of the heavy-duty truck and bus market, providing very good results in VECTO efficiency tests. Its high viscosity index of 176, Brookfield viscosity of 47000 mPa·s at -40 °C and pour point of -45 °C ensure reliable lubrication across a wide temperature range, while the kinematic viscosity of 12.2 mm²/s at 100 °C and flash point of 212 °C support durable high-temperature protection. Specifications: API GL-5/MT-1, SAE J2360. Approvals: IVECO 18-1805 Class RAS-1 (CTR No. I029.D21), Meritor HVS. Always consult the owner's manual to check the recommended viscosity grade and specifications for the specific vehicle.

Applications

  • It is especially recommended for heavy duty axles requiring SAE J2360 or API GL-5/ MT-1. PETRONAS Tutela Axle 900 EHD has been developed to meet latest efficiency requests of the heavy duty and buses market, providing very good results in VECTO efficiency tests.

Performance & benefits

  • Delivers extended drain intervals and total protection, even under the most severe conditions.
  • Developed to meet the latest efficiency requirements of the heavy-duty and bus market, with very good results in VECTO efficiency tests.

Standards & approvals

  • Gear oil, API GL-5 service level

    API's service designation for axle and manual transmission oils.

  • Gear oil, API MT-1 service level

    API's service designation for axle and manual transmission oils.

  • SAE J2360

    SAE J2360 — registered EP axle oil

    The standard that took over the MIL-PRF-2105E military specification. Unlike API GL-5 it requires product registration and axle rig testing, which makes it the harder level to hold.

  • IVECO 18-1805 Class RAS1 — axle gear oil

    IVECO's axle gear oil standard 18-1805, class RAS1.Source

Packaging

  • 20 L

Where should the files go?

We send the archive to the address below.

What you get

    Fields marked with are required.