Brand
Petronas
Type
Manual gearbox & axle oils
Primary standard
API GL-4
Manufacturer code
76003

Tutela Transmission Technyx

Fully synthetic SAE 75W-85 manual transmission fluid for passenger cars, API GL-4 Plus

Specifications

Manufacturer code
76003
Availability
On order

Approved for

Compatible vehicles

Fiat
Ducato

Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.

Typical characteristics

PropertyTypical valueMethod
AppearanceBright & Clear
Density @ 15°Cg/cm³0.865ASTM D 4052
Kinematic viscosity @ 100°Cmm²/s (cSt)11.5ASTM D 445
Viscosity index> 160ASTM D 2270
Brookfield Viscosity @ -40°CmPa.s (cP)40000ASTM D 2983
Pour point°C< -40ASTM D 97
Flash point COC°C> 180ASTM D 92

Complete documentation

We email you this product's sheets in a single archive.

Manufacturer's description

PETRONAS Tutela Technyx 75W-85 is a fully synthetic manual transmission fluid delivering total protection even in the most severe conditions, for today's manual transmissions over their entire service life. Due to its special formulation, boosted for a higher level of gear protection, it is especially recommended for passenger car transmissions requiring API GL-4 or API GL-4 Plus, providing high gear protection even in high torque density transmissions. High performance at low temperature together with high oxidation resistance deliver improved shiftability and thermal stability across a wide temperature range. Typical properties include density of 0.865 g/cm³ at 15°C, kinematic viscosity of 11.5 mm²/s at 100°C, viscosity index above 160, Brookfield viscosity of 40000 mPa·s at -40°C, pour point below -40°C and flash point (COC) above 180°C. The product meets API GL-4 Plus and is approved to FCA 9.55550-MX3 (CTR No. F010.B05).

Applications

  • Due to its special formulation boosted for higher level of gear protection, it is especially recommended for passenger cars transmissions requiring API GL-4 or API GL 4 Plus. PETRONAS Tutela Technyx provides high gear protection even in high torque density transmissions. The high performance at low temperature together with the high oxidation resistance deliver improved shiftability and thermal stability, making it suitable for use in a wide temperature range.

Performance & benefits

  • Special formulation boosted for a higher level of gear protection, even in high torque density transmissions.
  • High performance at low temperature and high oxidation resistance, delivering improved shiftability and thermal stability across a wide temperature range.

Standards & approvals

  • Gear oil, API GL-4 service level

    API's service designation for axle and manual transmission oils.

  • FCA 9.55550-MX3

    FCA 9.55550-MX3 — automatic transmission fluid

    A works standard from the FCA (formerly Fiat) 9.55550 block, reserved for automatic-transmission fluids; the MX3 suffix identifies the level a particular gearbox requires.Source

Packaging

  • 1 L
  • 200 L

Where should the files go?

We send the archive to the address below.

What you get

    Fields marked with are required.