On order
Mobilgard 1 SHC
Zinc-free synthetic oil for high-power distillate-fuelled marine diesel engines
SAE 40
Specifications
- Brand
- Eni
- Category
- Marine lubricants
- Type
- Four-stroke engine oils
- Manufacturer code
- 002855
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Density at 15°Ckg/m³ | 909 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 14.7 | ASTM D 445 |
| Viscosity at 40°Cmm²/s | 124 | ASTM D 445 |
| Viscosity index | 120 | ASTM D 2270 |
| Flash point COC°C | 223 | ASTM D 92 |
| Pour point°C | -30 | ASTM D 97 |
| B. N.mg KOH/g | 40 | ASTM D 2896 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni CLADIUM 400 SAE 40 is a lubricant formulated with high quality base stocks, developed for the lubrication of 4-stroke Diesel engines, which for high sulfur content in the fuel used and for the particular operating conditions require a lubricant with a base number (BN) particularly high.
Applications
- Eni CLADIUM 400 SAE 40 is a lubricant formulated with high quality base stocks, developed for the lubrication of 4-stroke Diesel engines, which for high sulfur content in the fuel used and for the particular operating conditions require a lubricant with a base number (BN) particularly high.
Performance & benefits
- The formulation of Eni CLADIUM 400 SAE 40 is designed with particular detergent characteristics capable of effectively preventing the formation of lacquers and carbon deposits in the areas of the pistons exposed to high temperatures, thus avoid rings sticking
- The alkalinity of the product expressed through the base number (BN) inhibits the corrosive effects that could occur as a result of the condensation of acid products deriving from the combustion process. This property is particularly useful in engines with low oil consumption or in operating conditions that induce cylinders surface temperatures capable of promoting the condensation of acidic substances
- Its antiwear properties make this product also suitable to lubricate the final reduction gears of the main engines
- The demulsive characteristics of Eni CLADIUM 400 SAE 40 allows an easy separation of water by centrifugation
- The product has antifoam properties that reduce the formation of air bubbles, this allows the formation of a continuous oil film
- Eni CLADIUM 400 SAE 40 is specifically recommended for application in 4-stroke Diesel engines operating with high sulphur content in the fuel or for frequent low temperatures operation, which require a high base number (BN) lubricant. The product is also recommended for the lubrication of 4-stroke Diesel engines, which due to the particular operating condition (low power delivered or stop and go), can induce the formation of acid condensation on the cylinders surfaces
- Eni CLADIUM 400 SAE 40 provides excellent performance even for engines fueled with distillate fuel, which run continuously in full power conditions. The product makes it possible to unify the lubrication requests in the cases in which there is a fleet of engines fueled partly by heavy fuel oil and the remaining part with distillate fuel
Standards & approvals
API CF
Diesel engine oil, API CF performance level
API's service category for indirect-injection diesel engines, tolerant of higher-sulphur fuel. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source