On order
Eni Aquamet 205
Cutting fluid free of secondary amines, boron and chlorine, for yellow alloys and stainless steel
ISO 6743-7 MAB
Specifications
- Brand
- Eni
- Category
- Metalworking fluids
- Type
- Water-miscible cooling and lubricating fluids
- Manufacturer code
- 007117
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | |
| Density at 15°Ckg/m³ | 965 | ASTM D 1298 |
| Emulsion Appearance (3%, Water 20°F) | opalescent | |
| PH (5% Emulsione) | 9.75 | ASTM D 1287 |
| Corrosion on paper | pass at 3% | DIN 51360/2 |
| Corrosion | pass al 3% | IP 125 |
| Refractometric factor | 1.3 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni Aquamet 700 EP is a cutting fluid with excellent technological properties, free of bactericide, secondary amines, boron and chlorine. It is formulated with special EP, detergent, anticorrosive and anti-rust additives. Eni Aquamet 700 EP is recommended for medium and severe machining operations such as threading, drilling, MAPAL boring and deep drilling of aluminium and its alloys (AVIO), titanium and its alloys, alloy and stainless steels. It can be used on cast iron, magnesium and its alloys. It is not intended for machining yellow metals. The product has a low foaming tendency across a wide range of water hardness and at high jet pressures. Recommended for single-machine and centralised systems.
Applications
- Eni Aquamet 700 EP is a cutting fluid with excellent technological characteristics, free from bactericides, secondary amines, boron and chlorine. Formulated with special lubricating and EP additives, detergent, anticorrosive and anti-rust agents. Eni Aquamet 700 EP is suitable for medium and severe cutting operations such as: tapping, boring, MAPAL boring and deep drilling on aluminum and its alloys (AVIO), on titanium and its alloys, on steel and stainless steels, on cast iron, on magnesium and its alloys; it is not suitable for machining yellow metals. It is suitable for grinding operations. Eni Aquamet 700 EP shows a low foaming tendency in a wide range of water hardness, hard water and even under high delivery pressure. Suitable for single and centralized systems.
Performance & benefits
- Free from biocides and secondary amines for a lower ecotoxicological impact and better conditions of the working environment
- Excellent cutting, cooling and lubricating capacity for less tool wear and better surface finishing of the workpieces
- High emulsion stability, with consequent reduction of the maintenance operations
- Suitable for working in a wide range of water hardness (optimal range: 10-50°F)
- Low tendency to form foam, even in presence of high delivery pressure
- Excellent detergent and anticorrosive properties to protect the machine tools, equipment and workpieces
- Free from boron and chlorine, lower disposal costs
Standards & approvals
ISO 6743-7 MAC
Metalworking fluid, class MAC — ISO 6743-7
Class MAC of ISO 6743-7 (family M, metalworking): neat cutting oil, medium-duty.