On order
Eni Aster FP
Chlorine-free EP cutting fluid for deep drilling
ISO 6743-7 MHF
Specifications
- Brand
- Eni
- Category
- Metalworking fluids
- Type
- Cutting oils
- Manufacturer code
- 005210
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | limpid | |
| Density at 15°Ckg/m³ | 890 | ASTM D 4052 |
| Viscosity at 40°Cmm²/s | 32.0 | ASTM D 445 |
| Flash point (COC)°C | 215 | ASTM D 92 |
| Pour point°C | -12 | ASTM D 97 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni Aster TG is an active-type EP mineral oil, free of chlorine, for severe gear cutting on Fellows, Gleason and Pfauter machines. It is also recommended for gear tooth shaving, and for slotting and threading high-alloy and stainless steels, aluminium, titanium and their alloys. Eni Aster TG is not recommended for machining yellow metals.
Applications
- Eni Aster TG is an EP (active) mineral cutting oil, chlorine free, suitable for severe machining like gear cutting on Fellows, Gleason and Pfauter machines. It is also suitable for gear shaving, slotting, tapping and threading on high-alloy steel, stainless steel, aluminium, titanium and its alloys. Eni Aster TG is not suitable for machining of yellow metals.
Performance & benefits
- Low tendency to form mist and foam
- Very high lubricating and EP properties, friction reduction
- Improvement of the workpiece surface quality, increase of the tool life
- High corrosion protection of the workpieces and the machine tool
Standards & approvals
ISO 6743-7 MHF
Metalworking fluid, class MHF — ISO 6743-7
Class MHF of ISO 6743-7 (family M, metalworking): water-miscible metalworking fluid with extreme-pressure additives.