Specifications
- Brand
- Eni
- Category
- Biodegradable lubricants (ECL)
- Type
- Industrial greases
- Manufacturer code
- 004614
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | smooth textured | |
| Colour | light brown | |
| Thickener type | calcio anidro | |
| Consistency (NLGI Grade) | 2 | ASTM D 217 |
| Penetration at 60 double strokedmm | 280 | ASTM D 217 |
| Base oil type | sintetico | |
| Base oil viscosity at 40°Cmm²/s | 220 | ASTM D 7042 |
| Dropping point°C | 145 | ASTM D 566 |
| EMCOR Test in distilled Water | 0/0 | IP 220 |
| Copper corrosion | 1a | ASTM D 4048 |
| Water washout at 38°C% | 2 | ASTM D 1264 |
| Timken OK loadlbs | 45 | ASTM D 2509 |
| Starting Torque TestmNm | 260 | ASTM D 1478 |
| Running Torque Test -30°CmNm | 70 | ASTM D 1478 |
| Temperature range°C | -35/+120 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni Eco Grease Plus 2 is a readily biodegradable grease according to method OECD 301B. It is a multipurpose grease based on anhydrous calcium soap with synthetic esters, additivated for anti-rust, antioxidant and EP (extreme pressure) performance. Eni Eco Grease Plus 2 is intended in particular for lubricating bearings, chains, cables and components operating in environmentally sensitive areas where contamination of the environment is a risk. It is recommended for components operating in wet and marine environments, ships' deck equipment, port cranes, water treatment plants, sluice gates and the like. Eni Eco Grease Plus 2 is also used for lubricating tunnel boring machines (TBM), agricultural and marble-working machinery, and for railway applications.
Applications
- Eni Eco Grease Plus 2 is an 'eco-friendly' grease, readily biodegradable according to OECD 301B method. It’s a multipurpose anhydrous calcium grease formulated with synthetic esters, antirust, antioxidant and EP additives. Eni Eco Grease Plus 2 is specifically designed for the lubrication of bearings, chains, wire ropes and components operating in environmentally sensitive areas where contamination of the environment is a risk. Suitable for the lubrication of components operating in wet and marine environments, ships on-deck applications, harbour lifting cranes, water treatment plants, dams, locks and water ways. Eni Eco Grease Plus 2 is also suitable for the lubrication of TBM (Tunnel Boring Machine), of agricultural and marble cutting machines and for railways applications.
Performance & benefits
- Ideal for applications in sensitive areas where it is preferable or mandatory the use of 'ecofriendly' products to respect the environment, thanks to its readily biodegradability according to the OECD 301B method
- It can be used in wet environments and in presence of water thanks to its very good adhesion and water resistance
- High protection against corrosion in wet and marine environments
- Excellent low temperature pumpability
- Very good load carrying capability that contributes to extend the components life
- Longlife grease thanks to its very high mechanical and oxidative stability that contributes to extend the re-greasing intervals
Standards & approvals
OECD 301
Ready biodegradability (OECD 301)
The OECD test series that determines whether a substance biodegrades readily in an aerobic aquatic environment.Source
DIN 51825 KP2K-30
Lubricating grease KP2K-30 — DIN 51825
A DIN 51825 grease designation: consistency, thickener/EP-additive letters and lowest service temperature are coded in "KP2K-30" (P = EP additives, F = solid additives, HC = special base oil, the digit is the NLGI grade, the following letter the upper temperature range, the final figure the lower service-temperature limit).
ISO 12924 L-XCCHB 2
Grease classification L-XCCHB 2 — ISO 12924
An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.