On order
Tutela DOT 5.1
Fully synthetic DOT 5.1 brake fluid for high-performance braking systems
FMVSS 116 - DOT5.1
Specifications
- Brand
- Eni
- Category
- Brake fluids
- Type
- Brake fluids
- Manufacturer code
- 007445
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | |
| Density at 20°Ckg/m³ | 1045 | ASTM D 1298 |
| Viscosity at -40°Cmm²/s | 890 | ISO 4925/05-5.1 |
| Water content%(m/m) | 0.19 | ASTM D 1364 |
| pH | 7.1 | ISO 4925/05-5.3 |
| Dry boiling point°C | 263 | ISO 4925/05-5.2 |
| Wet boiling point°C | 186 | ISO 4925/05-5.2.6 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni Brake Fluid DOT 5.1 is a high-performance synthetic fluid for braking circuits, meeting the U.S. Federal Motor Vehicle Standard No. 116 / DOT 5.1. Its high boiling point lets it be used safely in demanding ambient conditions, or under prolonged braking that overheats the system, and its viscosity has been adjusted for use at low ambient temperatures too. It is not corrosive to the metals used in brake circuits and does not swell rubber or plastic components, so seals and gaskets are left undamaged; it lubricates well, with an anti-wear action, and stays chemically stable even at high temperature.
Applications
- Eni Brake Fluid DOT 5.1 is a high performance synthetic fluid for braking circuits, meeting U.S. Federal Motor Vehicle Standard N° 116/DOT 5.1.
Performance & benefits
- With its high boiling point, Eni Brake Fluid DOT 5.1 can be safely used in demanding environmental conditions, or prolonged braking actions that overheat the braking system
- The viscosity characteristics of the product have been adjusted in order to make it suitable for use also at low ambient temperatures
- Eni Brake Fluid DOT 5.1 is not corrosive to the metals used in brake circuits, and does not swell rubber or plastic components, preventing any damage to seals and gaskets. It also has good lubricant properties with an antiwear action, and is chemically stable even at high temperature
Standards & approvals
SAE J1703
SAE J1703 — DOT 3 brake fluid
The SAE standard for glycol brake fluids at the DOT 3 level, defined by dry and wet boiling point.
FMVSS 116 - DOT5.1
FMVSS 116 — DOT 5.1 brake fluid
The US federal motor vehicle safety standard for glycol-based brake fluid, DOT 5.1 grade (highest boiling point of the glycol-based grades).
ISO 4925 Class 5.1
Brake fluid Class 5.1 — ISO 4925
Class 5.1 of ISO 4925: a non-silicone glycol-based brake fluid matching the DOT 5.1 level, with a higher boiling point than Class 4.