On order
Eni Grease NG 3
Graphite grease for open gears, chains and cables
ISO 12924 L-XBBGA 3
Specifications
- Brand
- Eni
- Category
- Industrial greases
- Type
- Calcium-based greases
- Manufacturer code
- 004606
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour | ambrato chiaro | |
| Thickener type | calcio anidro | |
| Consistency (NLGI Grade) | 3 | ASTM D 217 |
| Penetration at 60 double strokedmm | 235 | ASTM D 217 |
| Base oil type | minerale | |
| Base oil viscosity at 40°Cmm²/s | 100 | ASTM D 7042 |
| Dropping point°C | 150 | ASTM D 566 |
| Oil separation% (m/m) | 2 | ASTM D 1742 |
| Water washout at 79°C% (m/m) | 2 | ASTM D 1264 |
| Temperature range°C | -20/+80 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Anhydrous calcium grease on a mineral base oil, homogeneous, light amber in colour. _(Eni publishes no prose description for this range — this is what its data sheet states)_
Applications
- Eni Grease CC 3 is a yellow anhydrous-calcium base grease, smooth-textured. The calcic base gives good water washout resistance characteristics both in presence of hot or cold water. Eni Grease CC 3 can be applied by automated and manual pressure greaser for the lubrication of pins, bearings, guides and joints also exposed to the moisture,water action and subjected to thermal and mechanical not heavy stresses (speed and pressure). Is not suitable for use in centralized lubrication systems.
Performance & benefits
- Ensures a film on surfaces with good lubricating and protective characteristics
- Water Repellent and insoluble both in hot or cold water
Standards & approvals
ISO 12924 L-XBBGA 3
Grease classification L-XBBGA 3 — ISO 12924
An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.
DIN 51825 K3G-20
Lubricating grease K3G-20 — DIN 51825
A DIN 51825 grease designation: consistency, thickener/EP-additive letters and lowest service temperature are coded in "K3G-20" (P = EP additives, F = solid additives, HC = special base oil, the digit is the NLGI grade, the following letter the upper temperature range, the final figure the lower service-temperature limit).