eni Grease MU 00/JD 0

Specifications

Brand

Eni

Category

Industrial greases

Type

Lithium-based greases

Manufacturer code

007681

Availability

On order

Approved for

• ISO
• DIN

Manufacturer's description

AGIP GREASE MU 00/JD was developed for lubricating the picker bar cams, bushings, sun gears, spindle drive gears and unit drive gear cases of JD cotton picker machines. It is also suitable wherever a semi-fluid grease without EP (extreme pressure) properties is required — plain and rolling bearings, swivels, joints and other parts of industrial, construction and agricultural machinery; it can be used, for instance, in some types of centralised grease system fitted to road haulage trucks.

Applications

• AGIP GREASE MU 00/JD has been developed for lubrication of piker bar cams, bushings, sun gears, spindle drive gears and unit drive gear cases of JD cotton piker machines. It is also suitable in all cases requiring a semifluid grease without EP (Extreme Pressure properties), therefore for plain and rolling bearings, swivels, joints and other parts of industrial, construction and agricultural machinery (for instance, it can be employed in some types of centralized grease systems installed on road-haulage trucks).

Performance & benefits

•  The high mechanical and chemical stability of the product ensures that its properties remain unaltered even after long exposure to intense mechanical loads and thermal stresses.  Its outstanding resistance to oxidation inhibits deterioration both during storage and use, while its high dropping point allows the product to be used effectively over a wide range of temperatures.  AGIP GREASE MU 00/JD grease adheres tenaciously to the surfaces to which it is applied, resisting the dislodging effect of vibrations. It is also water-resistant, so it can be used in wet environments and in contact with water

Standards & approvals

• DIN 51826 G00/000K-20

  Semi-fluid gear grease G00/000K-20 — DIN 51826

  A DIN 51826 semi-fluid gear grease designation "G00/000K-20": additive letters, NLGI consistency and lower service-temperature limit, for enclosed gear units lubricated with a pumpable grease.

• ISO 12924 L-XBCDA 00/000

  Grease classification L-XBCDA 00/000 — ISO 12924

  An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.