On order
Eni Grease MU 1
Multipurpose lithium grease, water resistant
ISO 12924 L-XBCHA 1
Specifications
- Brand
- Eni
- Category
- Industrial greases
- Type
- Lithium-based greases
- Manufacturer code
- 004626
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Colour | brown yellow | |
| Base oil type | mineral | |
| Base oil viscosity a 40°Cmm²/s | 100 | ASTM D 7042 |
| Thickener type | lithium | |
| Consistency (NLGI Grade) | 3 | |
| Drop point°C | 205 | ASTM D 566 |
| Penetration, worked, 60 d. s.dmm | 235 | ASTM D 217 |
| Oil separation% (m/m) | 1 | ASTM D 1742 |
| Temperature range°C | -20/+120 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni Grease MU 3 is a yellow-brown grease, mineral-based and thickened with lithium soap. Its high dropping point allows the grease to be used across a wide temperature range. Eni Grease MU 3 is recommended for lubricating plain and rolling bearings, joints and other parts of industrial machinery, agricultural and construction equipment, even in damp environments or in contact with water, thanks to its water-repellent characteristics.
Applications
- Eni Grease MU 3 is a yellow-brown grease, mineral-based and thickened with lithium soap. The high dropping point allows the grease to be used in a wide range of temperature. Eni Grease MU 3 is suitable for the lubrication of flat and rolling bearings, joints and other parts of industrial, construction and agricultural equipment, even in damp environments and also in direct contact with water, thanks to the water repellency characteristics.
Performance & benefits
- Good surfaces adhesiveness
- Good vibrations resistance
- Multipurpose product, facilitate the lubricants organization and make possible the storage rationalization
- Strong stability even after intense and prolonged mechanical and thermal stress
- Good oxidation resistance
- High anti-rust protection
Standards & approvals
ISO 12924 L-XBCHA 3
Grease classification L-XBCHA 3 — ISO 12924
An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.
DIN 51825 K3K-20
Lubricating grease K3K-20 — DIN 51825
A DIN 51825 grease designation: consistency, thickener/EP-additive letters and lowest service temperature are coded in "K3K-20" (P = EP additives, F = solid additives, HC = special base oil, the digit is the NLGI grade, the following letter the upper temperature range, the final figure the lower service-temperature limit).