Eni Rubus High Performance Grease

Specifications

Brand

Eni

Category

Industrial greases

Type

Aerosol lubricants

Manufacturer code

006805

Availability

On order

Approved for

• ISO
• DIN

Typical characteristics

Manufacturer's description

Eni Rubus High Performance Grease is a multifunctional food grease spray, synthetic based, thickened by complex sulfonate and with EP (extreme pressure) characteristics. Eni Rubus High Performance Grease is indicated for the lubrication of components, also loaded, such as: chains, conveyor belts, bearings, small gears, joints, slides, hinges and seals operating in a wide range of temperatures in the food, pharmaceutical and cosmetic sectors, moreover, thanks to its high resistance to corrosion and water washout, is suitable for the lubrication in wet environments or in the presence of water or steam. The product is formulated exclusively with additives listed in the FDA Group 21 CFR 178.3570 and they are free of genetically modified materials, main allergens substances like nut oil, soya oil, dairy industry derivatives and animal derived materials.

Applications

• Eni Rubus High Performance Grease is a multifunctional food grease spray, synthetic based, thickened by complex sulfonate and with EP (extreme pressure) characteristics. Eni Rubus High Performance Grease is indicated for the lubrication of components, also loaded, such as: chains, conveyor belts, bearings, small gears, joints, slides, hinges and seals operating in a wide range of temperatures in the food, pharmaceutical and cosmetic sectors, moreover, thanks to its high resistance to corrosion and water washout, is suitable for the lubrication in wet environments or in the presence of water or steam. The product is formulated exclusively with additives listed in the FDA Group 21 CFR 178.3570 and they are free of genetically modified materials, main allergens substances like nut oil, soya oil, dairy industry derivatives and animal derived materials.

Performance & benefits

• Meets the requirements of the HACCP (Hazard Analysis and Critical Control Point) System thanks to NSF H1 (incidental contact with food) registration
• Ensures high penetrating power, not harden or paste
• Shows very high adhesiveness and excellent resistance to wear and load
• Suitable for applications operating in a wade range of temperature from -45°C up to +180°C (with peaks up to +200°C)
• Ensures high corrosion protection
• Compatible with the elastomers normally used in food machinery lubrication systems
• Excellent resistance to water and vapour washout
• Prolongs the lubrication intervals thanks to the high thermo oxidative stability at low and high temperatures

Standards & approvals

• NSF H1

  NSF H1 — incidental food contact lubricant

  The NSF registration for lubricants that may incidentally touch food during production. The formulation is limited to permitted substances, and the contact stays incidental, not intended.

• ISO 12924 L-XDFGB 2

  Grease classification L-XDFGB 2 — ISO 12924

  An ISO 12924 grease code: "X" marks a grease, the following letters give the lowest/highest service temperature, water resistance and EP performance, and the trailing figure is the NLGI consistency grade.

• DIN 51825 KPFHC2R-40Grease

  Lubricating grease KPFHC2R-40Grease — DIN 51825

  A DIN 51825 grease designation: consistency, thickener/EP-additive letters and lowest service temperature are coded in "KPFHC2R-40Grease" (P = EP additives, F = solid additives, HC = special base oil, the digit is the NLGI grade, the following letter the upper temperature range, the final figure the lower service-temperature limit).