Petronas Tutela Axle 700 EHD 75W-90
Fully synthetic oil for gearboxes and axles with extended drain intervals, SAE J2360
SAE 75W-90
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
| Property | Typical value | Method |
|---|---|---|
| SAE Grade | 75W-90 | |
| Appearance | clear | |
| Colour | L 1,5 | DIN ISO 2049 |
| Viscosity/40°C | 110 mm²/s | ASTM D 7042 |
| Viscosity/100°C | 15.5 mm²/s | ASTM D 7042 |
| Viscosity index | 150 | ASTM D 2270 |
| Density/15°C | 880 kg/m³ | DIN EN ISO 12185 |
| Pour point | < -40 °C | DIN ISO 3016 |
| Flash point (Cleveland) | 200 °C | DIN ISO 2592 |
We email you this product's sheets in a single archive.

Divinol Synthogear SL 75W-90 (Art. No. 52070) is a fully synthetic high-performance oil for axle drives and gearboxes. This multigrade gear oil relies on the most advanced additive technology developed for commercial vehicles and thereby provides prolonged oil-change intervals. It is ideal for use under the highest mechanical and thermal stress and enables oil-change intervals of up to 500,000 km, always in accordance with the manufacturer's instructions. It is suitable for the highly stressed drive axles and gearboxes of commercial vehicles, and for fleets seeking maximum oil-change intervals. Divinol Synthogear SL 75W-90 meets API GL-4 / GL-5, MT-1, MIL-PRF-2105E and SAE J2360, and covers the performance requirements of Arvin Meritor 0-76-N, DAF (GL5), IVECO (MIL-PRF-2105E), MB-Approval 235.8, Scania STO 1:0, MAN 341 Z2, MAN 341 E3, MAN 342 S1 (200,000 km drain interval), Mack GO-J, Renault Axle (B0032/2 Annex 3), Volvo 97312 (where API GL-5 is serviceable), Detroit Diesel DFS93K219.01 and ZF TE-ML 02B/05A/07A/08/12B/12L/12N/16F/17B/19C/21A.
Meritor O-76-N — axle lubricant
The Meritor specification for axle lubricants in the O-76 series; the trailing letter gives the performance level and base oil, N being one of the synthetic extended-drain levels.
Gear oil, API GL-5 service level
API's service designation for axle and manual transmission oils.
MIL-PRF-2105E — EP gear and axle oil
The revised issue of the US military EP gear oil specification, which added seal compatibility requirements. Superseded by SAE J2360.
Mercedes-Benz hypoid axle oil (former numbering)
The Mercedes-Benz hypoid axle-oil approval later renumbered by Daimler Truck as DTFR 12B140; still seen on older datasheets under the MB-Approval 235.8 name.
Scania STO 1:0 — transmission and axle oil
Scania's works standard for the oils in its own gearboxes and axles, with synchroniser and hypoid gear protection requirements.
DFS 93K219.01 — 75W-90 axle gear oil
Detroit's fluid specification for 75W-90 axle/gear oils.Source
MAN 341 type Z2 — gearbox oil
Type Z2 of the MAN 341 list for manual gearbox oils, with in-house synchroniser protection requirements.
SAE J2360 — registered EP axle oil
The standard that took over the MIL-PRF-2105E military specification. Unlike API GL-5 it requires product registration and axle rig testing, which makes it the harder level to hold.
Volvo 97312 — transmission oil
The Volvo number for the oil in one of its own transmissions, used when ordering and in the service schedule.
Manual/automated truck, bus and van gearbox oil (ZF class 02B)
ZF's list of admitted lubricants for Manual and automated ZF transmissions for trucks, buses, light commercial and special vehicles; class 02B is the specific lubricant level a given unit in this family requires.Source