Petronas Tutela Transmission Stargear AX-ED

Fully synthetic SAE 75W-90 axle oil for heavy commercial vehicles, extended drain

We only sell wholesale, to companies and fleets. Delivery to your site in drums, IBCs or tankers.

Authorised Petronas distributor.

Free technical advice · Reply within 1 business day

Standards & approvals

  • SAE J2360 — registered EP axle oil

    Standard that took over the MIL-PRF-2105E military specification; unlike API GL-5 it requires product registration and axle rig testing.

  • Gear oil, API GL-5 service level

    API's service designation for axle and manual transmission oils.

  • Gear oil, API MT-1 service level

    API's service designation for axle and manual transmission oils.

  • Meritor O-76-N — axle lubricant

    The Meritor specification for axle lubricants in the O-76 series; N is a synthetic extended-drain level.

Standards & approvals

  • SAE J2360 — registered EP axle oil

    Standard that took over the MIL-PRF-2105E military specification; unlike API GL-5 it requires product registration and axle rig testing.

  • Gear oil, API GL-5 service level

    API's service designation for axle and manual transmission oils.

  • Gear oil, API MT-1 service level

    API's service designation for axle and manual transmission oils.

  • Meritor O-76-N — axle lubricant

    The Meritor specification for axle lubricants in the O-76 series; N is a synthetic extended-drain level.

  • MAN 341 type E3 — synthetic gearbox oil

    MAN 341 type E3: synthetic manual gearbox oil, extended drain interval.

  • MAN 342 type M3 — synthetic axle oil

    MAN 342 type M3: synthetic axle oil, extended drain interval.

  • Mercedes-Benz hypoid axle oil (former numbering)

    Mercedes-Benz approval for hypoid axle oil, renumbered by Daimler Truck as DTFR 12B140.

  • MIL-PRF-2105E

    MIL-PRF-2105E — EP gear and axle oil

    Revised issue of the US military EP gear oil specification, adding seal compatibility requirements; superseded by SAE J2360.

  • Scania STO 1:0 — transmission and axle oil

    Scania works standard for oils in its own gearboxes and axles, with synchroniser and hypoid gear protection requirements.

  • Manual/automated truck, bus and van gearbox oil (ZF class 02B)

    ZF list of admitted lubricants for ZF manual and automated transmissions for trucks, buses and light commercial vehicles.

  • Construction machinery axle oil (ZF class 05A)

    ZF list of admitted lubricants for ZF axles for construction machinery.

  • Bus and truck axle oil (ZF class 12L)

    ZF list of admitted lubricants for ZF axles and wheel heads for buses and trucks.

  • Bus and truck axle oil (ZF class 12N)

    ZF list of admitted lubricants for ZF axles and wheel heads for buses and trucks.

  • Rail-vehicle transmission oil (ZF class 16F)

    ZF list of admitted lubricants for ZF transmissions for rail vehicles.

  • Lift-truck transmission and axle oil (ZF class 17B)

    ZF list of admitted lubricants for ZF transmissions and axles for lift trucks.

  • Commercial-vehicle transfer-case oil (ZF class 19C)

    ZF list of admitted lubricants for ZF transfer and offset transmissions for commercial vehicles.

  • Tractor axle oil (ZF class 21A)

    ZF list of admitted lubricants for ZF tractor axles, harvester transmissions and final drives.

  • Mack GO-J — axle/hypoid gear oil

    Mack specification for hypoid gear oils in truck axles and heavily loaded manual transmissions.

Also listed

  • RENAULT note technique B0032/2 annex 3
The whole Petronas Tutela range

Specifications

Viscosity
SAE 75W-90
Manufacturer code
76441
Availability
On request

Compatible vehicles

Case
721F Wheel Loader, Quadtrac CVX, Steiger CVX
Claas
Xerion
DAF
CF, XF
Iveco
S-Way, Stralis
John Deere
644E Wheel Loader, 744H Wheel Loader, 844J Wheel Loader
Mack
Anthem/Pinnacle/Granite drive axles and transmissions and transfer cases
MAN
Lion's City, TGL, TGM, TGS, TGX
Mercedes-Benz
C-Class W204, E-Class W212
Meritor
single- and tandem-drive axles on European heavy trucks and trailers
New Holland
T9
Scania
G-series, P-series, R-series

Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.

Typical characteristics

PropertyTypical valueMethod
AppearanceB&C
Density 15°Cg/cm³0.870ASTM D 4052
Viscosity @ 100°CcSt15.1ASTM D 445
Viscosity @ 40°CcSt101ASTM D 445
Viscosity index157ASTM D 2270
Pour point°C-51ASTM D 97
Viscosity @ -40°CcPs67000ASTM D 2983
Flash point Cl. O. C.°C>200ASTM D 92
Foam @ 24°Ccc/sTRACES/0ASTM D 892

Complete documentation

Manufacturer's description

TUTELA TRANSMISSION STARGEAR AX-ED (PLI code 76441) is a fully synthetic fluid developed for the latest generation of heavy commercial vehicle axles, for use under heavy loads and with extended change intervals. The SAE 75W-90 formulation offers a high viscosity index of 157, a kinematic viscosity of 15.1 cSt at 100°C, a pour point of -51°C, a Brookfield viscosity of 67,000 cPs at -40°C and a flash point above 200°C, with foam limited to traces, ensuring both cold-start lubrication and a stable film at high operating temperatures. The product meets SAE J2360, API GL-5/MT-1 and MIL-PRF-2105E, holds the MB-Approval 235.8 and SCANIA STO 1:0, and covers ARVIN MERITOR O76-N, MAN 341 Type E3, MAN 342 Typ M3 performance, ZF TE-ML 02B, 05A, 12L, 12N, 16F, 17B, 19C and 21A, DAF performance, MACK GO-J performance and RENAULT note technique B0032/2 annex 3. Available in 20-litre and 200-litre packs; always check the axle manufacturer's requirements before use.

Applications

  • Axles of the latest generation of heavy commercial vehicles, under heavy loads.

Performance & benefits

  • Allows extended change intervals.

Frontier I.G. offers a complete range of solutions across mobility as a whole. Leading lubricants, tyres and innovative technical solutions for automotive, industry and agriculture.

About Frontier

Where should the files go?

Search