Tutela Transmission XT-D 540
Synthetic SAE 75W-80 heavy truck gearbox oil, drain intervals up to 300,000 km
SAE 75W-80
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
| Property | Typical value | Method |
|---|---|---|
| Appearance | Bright & Clear | |
| Density @ 15°Cg/cm³ | 0.860 | ASTM D 4052 |
| Kinematic viscosity @ 100°Cmm²/s (cSt) | 9.35 | ASTM D 445 |
| Viscosity index | 157 | ASTM D2270 |
| Flash point COC°C | 240 | ASTM D 92 |
| Pour point°C | -42 | ASTM D 97 |
We email you this product's sheets in a single archive.

PETRONAS Tutela XT-D540 75W-80 is a fully synthetic manual transmission fluid for buses, coaches, and light and heavy-duty commercial vehicles. It delivers fuel economy, extended drain intervals and total protection even in the most severe conditions, for transmissions with or without intarder or retarders. Typical properties include a bright and clear appearance, density of 0.860 g/cm³ at 15°C, kinematic viscosity of 9.35 cSt at 100°C, viscosity index of 157, flash point (COC) of 240°C and pour point of -42°C. The product meets API GL-4 and is approved to IVECO 18-1807 Class MGS2 (contractual technical reference No. I138.G11) and ZF TE-ML 01E, 02E and 16P.
Gear oil, API GL-4 service level
API's service designation for axle and manual transmission oils.
IVECO 18-1807 Class MGS2 — manual gearbox oil
IVECO's manual-gearbox oil standard 18-1807, class MGS2.Source
Manual truck gearbox oil (ZF class 01E)
ZF's list of admitted lubricants for Manual ZF transmissions for trucks; class 01E is the specific lubricant level a given unit in this family requires.Source
Manual/automated truck, bus and van gearbox oil (ZF class 02E)
ZF's list of admitted lubricants for Manual and automated ZF transmissions for trucks, buses, light commercial and special vehicles; class 02E is the specific lubricant level a given unit in this family requires.Source
Rail-vehicle transmission oil (ZF class 16P)
ZF's list of admitted lubricants for ZF transmissions for rail vehicles; class 16P is the specific lubricant level a given unit in this family requires.Source