On order
Eni OTE GT 46
Oil for gas and combined-cycle turbines, to 260 °C
ISO VG 46
Specifications
- Brand
- Eni
- Category
- Turbine oils
- Type
- Mineral oils
- Viscosity
- ISO VG 46
- Manufacturer code
- 002611
- Availability
- On order
Approved for
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | clear | APM 27 |
| Density at 15°Ckg/m³ | 861 | ASTM D 4052 |
| Viscosity at 40°Cmm²/s | 46 | ASTM D 445 |
| Viscosity index | 113 | ASTM D 2270 |
| Flash point (COC)°C | 226 | ASTM D 92 |
| Pour point°C | -12 | ASTM D 97 |
| N.N.mg KOH/g | 0.09 | ASTM D 974 |
| Demulsibility at 54°Cmins | 15 | ASTM D 1401 |
| Foaming (sequence I)cc/cc | 30/0 | ASTM D 892 |
| Air releasemins | 3 | DIN 51381 |
| Rust test/B | pass | ASTM D 665 |
| Copper corrosion | 1A | ASTM D 130 |
| FZG (A/8,3/90) - Damage rating | 9 | DIN 51354-2 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni OTE 46 is a lubricant intended in particular for steam and gas turbines. It is formulated with a high quality base oil and additives chosen specially to deliver excellent thermal and oxidation resistance, rapid air release and excellent demulsibility, which lets water separate readily from the oil. Eni OTE 46 delivers superior performance in turbo-blowers, hydraulic equipment and air compressors with medium to high compressed air temperatures, and in every application calling for a superior quality lubricant with good stability.
Applications
- Eni OTE 46 is a lubricant specifically designed for use in steam and gas turbine applications. It's based on high quality base-stocks with specially chosen additives to provide excellent thermal-oxidative, rapid air release and excellent demulsibility that permits water to separate readily from the oil. Eni OTE 46 provides outstanding performance in turbo-blowers, hydraulic machinery and air compressors with medium/high temperature of the compressed air and in all other applications requiring a high quality and good stability lubricant.
Performance & benefits
- Prolongs oil charge life extending re-lubrication intervals
- Ensures good lubrication film
- Increases turbine operation reliability
- Maximizes water removal system efficiency
- Meets most major turbine equipment builder specifications and industry specifications
Standards & approvals
Alstom HTGD 90117
Alstom turbine oil (now GE Vernova)
Alstom’s specification for the lubricating and control oils of its steam and gas turbines. Datasheets quote the edition the oil was tested against (V0001 W, X, Z or AA).
GE GEK 28143B
GE — turbine oil requirements
A General Electric specification for the lubricating and control oils of its own gas and steam turbines: high oxidation stability, rapid air release and resistance to varnish formation.Source
ASTM D 4304 Type I
ASTM D4304 Type I — mineral turbine oil
The American standard for turbine oils; Type I covers inhibited mineral oils with high oxidation stability and rapid water separation.
BS 489:1999
BS 489:1999 — steam turbine oils
The British standard for steam turbine oils: oxidation stability, water separation and air release.
CEI 10-8 (1994)
CEI 10-8 — insulating transformer oil
The Italian CEI guide for insulating oils in transformers and high-voltage switchgear: dielectric strength, water content and oxidation stability.
JIS K 2213 Type II
JIS K 2213 Type II — turbine oil (Japan)
The Japanese industrial standard for turbine oils; Type II covers inhibited oils, with oxidation and corrosion additives.
Ansaldo Energia W 3.1-0171-I60000
Ansaldo Energia W 3.1-0171-I60000 — turbine oil
An Ansaldo Energia works-standard number for the lubricating oil of its own turbines, kept separate from the TGO2-0171/B document for lack of confirming evidence that they are the same.
Ansaldo Energia 606W807 Rev.C (2012)
Ansaldo Energia 606W807 — turbine oil
A works standard for the lubricating and control oils of the maker's own turbines, with oxidation stability, air release and water separation requirements.
Siemens TLV 9013 04
Siemens TLV 9013 04 — turbine oil
Siemens' technical delivery condition for turbine oils used for lubrication and for hydraulic control systems.
ISO 8068 TSA
Turbine oil, class TSA — ISO 8068
Class TSA of ISO 8068 (family T, turbines): steam-turbine oil, standard grade.
ISO 8068 TGA
Turbine oil, class TGA — ISO 8068
Class TGA of ISO 8068 (family T, turbines): gas-turbine oil, standard grade.
DIN 51515-1 TD
Turbine oil TD — DIN 51515, part 1
The German standard for steam and gas turbine oils; class TD covers ordinary lubricating and control oils with high oxidation stability.