On order
Eni Multitech CT 30
Special oil for the transmissions and differentials of Caterpillar machines
Cat TO-4
Specifications
- Brand
- Eni
- Category
- Agricultural multifunction oils
- Type
- Universal
- Viscosity
- SAE 10W
- Manufacturer code
- 001292
- Availability
- On order
Approved for
Compatible vehicles
- Case
- 721F Wheel Loader
- Caterpillar
- powershift transmissions, torque converters and final drives
- John Deere
- 644E Wheel Loader, 744H Wheel Loader, 844J Wheel Loader
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Appearance | B&C | |
| Density at 15°Ckg/m³ | 865 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 6.5 | ASTM D 445 |
| Viscosity at -35°CcP | 124000 | ASTM D 2983 |
| Viscosity index | 129 | ASTM D 2270 |
| Pour point°C | -36 | ASTM D 5950 |
| Flash point COC°C | 210 | ASTM D 92 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
eni Multitech CT plus, available in the SAE 10W viscosity grade, is a special lubricant for CATERPILLAR machinery. eni Multitech CT plus is recommended for lubricating differentials, wet clutches, winches, final drives, gears and bearings. Thanks to its SAE 10W viscosity, eni Multitech CT plus can also be used in the hydraulic systems of Caterpillar equipment.
Applications
- Eni Multitech CT Plus 10W is a special lubricant suitable for use in Caterpillar machineries. It can be used for lubrication of Powershift and direct drive transmissions, final drives, differentials, winches, clutches, gears and bearings. The viscosity grade SAE 10W makes Eni Multitech CT Plus suitable for use in the hydraulic systems of Caterpillar equipments.
Performance & benefits
- Eni Multitech CT Plus 10W is balanced to give maximum life to the friction materials in Powershift transmissions and eliminate brake chatter in wet brake applications
- Eni Multitech CT Plus 10W meets the severe requirements of Caterpillar TO-4 specification which includes the frictional requirements and gear antiwear properties
- Even if it is not intended for engine applications, Eni Multitech CT Plus 10W supports an API CF/CF-2 engine oil performance, keeping machinery safe from any risk of failure due to misuse
- Although it is not officially approved by Komatsu, Eni Multitech CT Plus 10W is suitable for use in those applications for which the equipment manufacturer requires a KOMATSU KES 07.868.1 performance
Standards & approvals
Cat TO-4
Caterpillar TO-4 — transmissions, clutches and wet brakes
Caterpillar's current specification for transmission and wet-brake fluids in off-highway equipment, with strict friction and gear wear requirements.
Allison C-4
Allison C-4 — off-highway automatic transmission fluid
Allison's most widely quoted fluid specification for off-highway and truck automatic transmissions: stable wet-clutch friction, gear protection and seal compatibility.
ZF TE-ML 03C
Off-road equipment transmission fluid (ZF class 03C)
Chapter 03 of the ZF list of admitted lubricants, for torque-converter transmissions in off-highway equipment; the letter C identifies the level required.Source
Vickers 35VQ-25
Vickers 35VQ25 vane-pump wear test
A vane-pump bench wear test (Eaton/Vickers) used to qualify anti-wear hydraulic fluids for high-pressure mobile pumps; a fluid 'meets 35VQ25' rather than being certified by Vickers itself.Source
Komatsu KES 07.868.1 (2002)
Komatsu KES 07.868.1 — hydraulic fluid
Komatsu's works standard for hydraulic fluids in its own equipment, with in-house wear and low-temperature requirements.