On order
Eni Multitech CT Plus 10W
Special SAE 10W Caterpillar oil, also for the hydraulic systems
SAE 10W
Specifications
- Brand
- Eni
- Category
- Agricultural multifunction oils
- Type
- Universal
- Manufacturer code
- 001294
- Availability
- On order
Approved for
Compatible vehicles
- Case
- 721F Wheel Loader
- Caterpillar
- powershift transmissions, torque converters and final drives
- John Deere
- 644E Wheel Loader, 744H Wheel Loader, 844J Wheel Loader
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
Typical characteristics
| Property | Typical value | Method |
|---|---|---|
| Density at 15°Ckg/m³ | 891 | ASTM D 4052 |
| Viscosity at 100°Cmm²/s | 11.5 | ASTM D 445 |
| Viscosity at -26°CmPa·s | 103600 | ASTM D 2983 |
| Viscosity index | 100 | ASTM D 2270 |
| Flash point COC°C | 250 | ASTM D 92 |
| Pour point°C | -30 | ASTM D 5950 |
Complete documentation
We email you this product's sheets in a single archive.
Manufacturer's description
Eni Multitech CT 30 is a special lubricant for use in CATERPILLAR machinery. It is recommended for lubricating transmissions, drive systems, differentials, winches, clutches, gears and bearings.
Applications
- Eni Multitech CT 30 is a special lubricant for CATERPILLAR machines. It is suitable for lubrication of transmissions, drive systems, differentials, winches, clutches, reduction gears and bearings.
Performance & benefits
- The formulation is balanced to ensure the longest duration of friction materials in Powershift gearboxes, and to eliminate brake chatter in applications with wet brakes
- It has all the properties required by the severe CATERPILLAR TO-4 performance specification, which includes anti-friction and anti-wear properties
- Even if it is not intended for use in the engine, it can support API CF/CF-2 level performance, so reducing the risk of damage in case of improper use
- Although it is not officially approved by Komatsu, Eni Multitech CT 30 is suitable for use in all applications where the manufacturer requires a KES 07.868.1 performance level
Standards & approvals
Cat TO-4
Caterpillar TO-4 — transmissions, clutches and wet brakes
Caterpillar's current specification for transmission and wet-brake fluids in off-highway equipment, with strict friction and gear wear requirements.
Allison C-4
Allison C-4 — off-highway automatic transmission fluid
Allison's most widely quoted fluid specification for off-highway and truck automatic transmissions: stable wet-clutch friction, gear protection and seal compatibility.
ZF TE-ML 03C
Off-road equipment transmission fluid (ZF class 03C)
Chapter 03 of the ZF list of admitted lubricants, for torque-converter transmissions in off-highway equipment; the letter C identifies the level required.Source
ZF TE-ML 07F
Hydrostatic-mechanical drive gear oil (ZF class 07F)
ZF's list of admitted lubricants for ZF hydrostatic-mechanical and electric drive systems; class 07F is the specific lubricant level a given unit in this family requires.Source
Eaton Vickers M-2950-S
Vickers M-2950-S level — mobile hydraulic fluids
The Vickers requirement for hydraulic fluids in mobile equipment, the counterpart of I-286-S on the industrial side. Both were superseded by Eaton 03-401-2010.
Eaton Vickers I-280-S
Vickers I-280-S — mobile hydraulic fluids
The Vickers specification for hydraulic fluids in mobile equipment, defined by the V-104C vane pump wear test.