Tutela Transmission GI/E
ATF-based power steering fluid, to GM DEXRON-III performance level
GM Dexron III G
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
| Property | Typical value | Method |
|---|---|---|
| Appearance | Bright & Clear | |
| Colour | Red | |
| Density @15°Cg/cm³ | 0.855 | ASTM D 4052 |
| Kinematic viscosity @100°Cmm²/s (cSt) | 7.1 | ASTM D 445 |
| Kinematic viscosity @40°Cmm²/s (cSt) | 33 | ASTM D 445 |
| Viscosity index | 182 | ASTM D 2270 |
| Pour point°C | -48 | ASTM D 97 |
| Brookfield Viscosity @-40°CmPa.s (cP) | 15000 | ASTM D 2983 |
| Flash point COC°C | 195 | ASTM D 92 |
We email you this product's sheets in a single archive.

PETRONAS Tutela ATF D3 is a high-quality automatic transmission fluid delivering long-lasting shifting performance and component durability for automatic transmissions over their standard service life. It is suitable for use in many conventional automatic transmissions, power steering and hydraulic systems of passenger cars, alongside commercial vehicles and off-highway construction equipment requiring GM DEXRON-III level of performance, and it also meets the JASO M315-2013 1A and 2A standards recognised by Japanese OEMs for use in automatic transmissions. Benefits include enhanced anti-wear and gear protection to extend component durability, good thermal and oxidation stability at high temperature for prolonged oil life, smooth shudder-free shift performance under normal and severe operating conditions, and good low-temperature fluid flow performance. The fluid meets JASO M315-2013 1A/2A, DEXRON-IIIH/IIIG, Allison C-4, Bosch/ZF TE-ML 09, CAT TO-2 and Ford Mercon specifications, with IVECO 18-1807 approval for power-steering systems.
Automatic transmission fluid, JASO M315 Type 1A
Japanese classification (JASO M315) for Dexron-type automatic transmission fluids, with requirements layered on top of the GM Dexron III/Dexron VI specifications.
Automatic transmission fluid, JASO M315 Type 2A
JASO M315 class for Mercon-type automatic transmission fluids, with requirements layered on top of the corresponding Ford Mercon specifications.Source
GM DEXRON III-G — automatic transmission fluid (obsolete)
The DEXRON III-G level, with better oxidation stability than II-D. Licensing has ended and GM has moved on to DEXRON VI.
Allison C-4 — off-highway automatic transmission fluid
Allison's most widely quoted fluid specification for off-highway and truck automatic transmissions: stable wet-clutch friction, gear protection and seal compatibility.
Steering-system and oil-pump gear oil (ZF class 09)
ZF's list of admitted lubricants for ZF steering systems and oil pumps for cars, commercial and off-road vehicles (maintained by Bosch since 2015); class 09 is the specific lubricant level a given unit in this family requires.Source
FCA 9.55550-AG2 — automatic transmission fluid
A works standard from the FCA (formerly Fiat) 9.55550 block, reserved for automatic-transmission fluids; the AG2 suffix identifies the level a particular gearbox requires.Source
IVECO 18-1807 Power Steering — power-steering fluid
IVECO's standard 18-1807 sub-class for power-steering-only hydraulic fluid.