Eni i-Sint 5W-40
Synthetic oil for modern passenger car and light vehicle engines
SAE 5W-40
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
| Property | Typical value | Method |
|---|---|---|
| SAE Grade | 5W40 | |
| Ash / Sulfate DIN 51575 | 0.9 % | |
| Colour | 4.5 | DIN ISO 2049 |
| Viscosity/40°C | 87 mm²/s | ASTM D 7042 |
| Viscosity/100°C | 14.3 mm²/s | ASTM D 7042 |
| Viscosity index | 172 | ASTM D 2270 |
| Density/15°C | 0,850 g/cm³ | DIN EN ISO 12185 |
| Pour point | -39 °C | DIN ISO 3016 |
| Flash point (Cleveland) | ≥ 200 °C | DIN ISO 2592 |
| TBN | 10.8 mgKOH/g |
We email you this product's sheets in a single archive.

Divinol Syntholight 5W-40 (Art-Nr. 49520) is a smooth-running engine oil based on the most modern HC-synthesis technology. It guarantees excellent running properties, low wear and measurable fuel savings through reduced friction, together with fine cold-starting performance thanks to its 5W grade. The oil shows high resistance to oxidation, and its well-balanced additive system prevents sludge formation, keeping the engine clean over the service interval. It is designed for spark-ignition (petrol) and diesel engines in passenger cars, with or without turbocharger. Divinol Syntholight 5W-40 holds the MB-Approval 229.3, meets API SN/CF and ACEA A3/B4, and fulfils the performance requirements of BMW Longlife-01, MB-Approval 229.1, Porsche A40, PSA B71 2294/2296, Renault RN 0700/0710, VW 502.00/505.00, FIAT 9.55535 N2 and GM-LL-B-025. The Romanian distributor additionally lists GM-LL-A-025.
Petrol engine oil, API SN performance level
API's service category for spark-ignition engines. Current category.Source
Diesel engine oil, API CF performance level
API's service category for indirect-injection diesel engines, tolerant of higher-sulphur fuel. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source
ACEA A3/B4 oil sequence
ACEA's sequence for petrol and light-duty diesel engines.Source
Mercedes-Benz Longlife passenger-car engine oil
Mercedes-Benz's approval for full-SAPS, extended-drain engine oils in petrol and diesel passenger cars, roughly at the ACEA A3/B4 performance level.
Porsche's engine oil approval for petrol models without a particulate filter: a full-SAPS level with severe protection requirements at high speed and temperature.
Renault RN0700 — passenger-car engine oil
Renault's engine oil approval for petrol cars and for diesel engines without a particulate filter.
Renault RN0710 — engine oil for DPF diesels
Renault's oil approval for passenger-car diesel engines, including those with a particulate filter, with in-house wear protection requirements.
VW 502 00 — petrol engine oil
VW's standard for petrol engine oils on a fixed drain interval, at full-SAPS level. Not for engines with a particulate filter.
VW 505 00 — diesel engine oil
VW's standard for passenger-car diesel engine oils without unit-injector injection, on a fixed drain interval.
GM LL-A-025 — longlife petrol engine oil
The Opel/GM Europe specification for extended-drain oils in petrol engines. In practice superseded by dexos2.
GM LL-B-025 — longlife diesel engine oil
The Opel/GM Europe specification for extended-drain oils in passenger-car diesel engines. In practice superseded by dexos2.
BMW's approval for extended-drain engine oils in petrol and diesel engines without a particulate filter. A full-SAPS level built on ACEA A3/B4.
FCA 9.55535-N2 — petrol engine oil, extended drain
A fluid specification from the FCA (formerly Fiat) 9.55535 series; the N2 suffix identifies this performance level and viscosity class, used at the level the vehicle maker specifies.Source
PSA B71 2296 — engine oil
The PSA (Peugeot–Citroën, today Stellantis) engine oil approval for its own passenger cars, with particulate filter compatibility and wear protection requirements.
Mercedes-Benz passenger-car engine oil, entry level
An early Mercedes-Benz approval for petrol and diesel passenger-car engine oils on a standard (non-extended) service interval, the base level below 229.3 and 229.5.
PSA B71 2294 — engine oil approval
The PSA (Peugeot–Citroën, today Stellantis) engine oil approval for its own passenger cars, at the ACEA level and viscosity grade PSA specifies.Source