Eni i-Sint TD 5W-40
Synthetic oil for cars with advanced diesel engine technology
SAE 5W-40
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
| Property | Typical value | Method |
|---|---|---|
| SAE Grade | 0W30 | |
| Colour | L 4,0 | DIN ISO 2049 |
| Viscosity/40°C | 55 mm²/s | ASTM D 7042 |
| Viscosity/100°C | 10 mm²/s | ASTM D 7042 |
| Viscosity index | 175 | ASTM D 2270 |
| Density/15°C | 0,845 g/cm³ | DIN EN ISO 12185 |
| Pour point | -40°C | DIN ISO 3016 |
| Flash point (Cleveland) | <-35°C | DIN ISO 2592 |
We email you this product's sheets in a single archive.

Divinol Syntholight 0W-30 (Art-Nr. 49480) is a fully synthetic engine oil based on the latest technology. It meets the requirements set for extended oil-change intervals and provides optimal lubrication properties across the entire service interval, making it a precisely matched oil for modern passenger cars. The oil can be used in petrol and diesel engines, including vehicles with turbocharger and catalytic converter. Its key benefits are optimum engine cleanliness, excellent anti-wear protection, a lubricant film that does not tear under load and minimal evaporation losses, with the 0W-30 grade ensuring rapid oil flow at cold start. Divinol Syntholight 0W-30 meets API SN/CF and fulfils the performance requirements of MB-Approval 229.5/229.3, BMW Longlife-01, VW 505.00/502.00, GM-LL-B-025 and Renault RN 0700/0710.
Petrol engine oil, API SN performance level
API's service category for spark-ignition engines. Current category.Source
Diesel engine oil, API CF performance level
API's service category for indirect-injection diesel engines, tolerant of higher-sulphur fuel. An earlier category in the API service classification, written for the engines of its era; it still appears on datasheets alongside the current categories.Source
Mercedes-Benz full-SAPS extended-drain engine oil
Mercedes-Benz's approval for full-SAPS engine oils with extended drain intervals and higher performance than 229.3, for petrol and diesel passenger-car engines without a particulate filter.
Mercedes-Benz Longlife passenger-car engine oil
Mercedes-Benz's approval for full-SAPS, extended-drain engine oils in petrol and diesel passenger cars, roughly at the ACEA A3/B4 performance level.
BMW's approval for extended-drain engine oils in petrol and diesel engines without a particulate filter. A full-SAPS level built on ACEA A3/B4.
VW 505 00 — diesel engine oil
VW's standard for passenger-car diesel engine oils without unit-injector injection, on a fixed drain interval.
VW 502 00 — petrol engine oil
VW's standard for petrol engine oils on a fixed drain interval, at full-SAPS level. Not for engines with a particulate filter.
GM LL-B-025 — longlife diesel engine oil
The Opel/GM Europe specification for extended-drain oils in passenger-car diesel engines. In practice superseded by dexos2.
Renault RN0700 — passenger-car engine oil
Renault's engine oil approval for petrol cars and for diesel engines without a particulate filter.
Renault RN0710 — engine oil for DPF diesels
Renault's oil approval for passenger-car diesel engines, including those with a particulate filter, with in-house wear protection requirements.