Shell Helix Extra X 5W-40

Specifications

Brand

Shell

Category

Engine oils

Viscosity

SAE 5W-40

Manufacturer code

001N9389

Availability

On order

Approved for

• Volkswagen
• Mercedes-Benz
• Renault
• Fiat

Compatible vehicles

Fiat

Bravo, Grande Punto

Mercedes-Benz

C-Class W203, E-Class W211, SL-Class R230

Renault

Clio dCi, Clio III RS, Laguna III, Megane II RS, Megane III RS

Volkswagen

Bora, Golf III, Golf IV, Golf V, New Beetle, Passat B5, Passat B6, Polo III, Touareg

Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.

Typical characteristics

Manufacturer's description

Fully synthetic motor oil - Enhance your engine's efficiency by reducing friction for optimized performance. Shell Helix Extra fully synthetic motor oil works hard to help keeping modern engines running efficiently and well protected. With Anti-Friction Technology, it helps to reduce engine frictions to provide enhanced fuel economy and protection suitable for all OEM-recommended drain intervals.

Applications

• Shell Helix Extra's fully synthetic formulation can be used in engines in a wide variety of modern vehicles that face these demanding driving conditions and can be recommended for customers who want to keep the same oil-drain interval, operating in extreme climates or driving in congested stop- start city traffic.
• Shell Helix Extra can be used for gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
• It is also suitable for use in modern direct injection turbocharged gasoline engines where it provides protection against damaging low-speed pre-ignition (LSPI).

Performance & benefits

• Superior active cleansing technology 1
• Actively locks away harmful performance-robbing deposits.
• Helps to remove sludge left behind by inferior oils 2 Excellent wear protection 3
• Helps to extend engine life by protecting against wear, even in the toughest driving conditions.
• Long-term resistance to oil degradationHelps to maintain protection throughout the oil-drain interval.
• Long lifeSuitable for all equipment-manufacturer-recommended oil- drain intervals.
• Faster oil flow for quicker engine warm-up 4 Low-evaporation formulation 5
• Low oil consumption for less frequent top-up.
• Multi-fuel capabilityCan be used for gasoline, diesel and gas engines, and is also suitable for biodiesel and gasoline/ethanol blends.
• Low Speed Pre-Ignition Protection (LSPI)The latest highly rated turbocharged gasoline direct injection engines can be vulnerable to damaging LSPI events resulting from uncontrolled ignition of the fuel. 1 Compared with Shell Helix mineral oils 2 Based on a severe sludge clean-up test 3 Based on Sequence IVA engine test carried out at an independent laboratory 4 Compared with higher-viscosity oils 5 Based on NOACK volatility test and equipment manufacturers’ requirements
• Active clean-up Helps to remove sludge left behind by inferior oils 2
• Excellent wear protection 3 Helps to extend engine life by protecting against wear, even in the toughest driving conditions
• Enhanced low-temperature performance 4 Faster oil flow for quicker engine warm-up 5
• Low-evaporation formulation Low oil consumption for less frequent top-up
• Meets the requirements of Fiat (FCA) 9.55535-M2,Renault RN 0700

Standards & approvals

• API SP

  Petrol engine oil, API SP performance level

  API's service category for spark-ignition engines. Current category.Source

• ACEA A3/B4

  ACEA A3/B4 oil sequence

  ACEA's sequence for petrol and light-duty diesel engines.Source

• MB-Approval 229.5

  Mercedes-Benz full-SAPS extended-drain engine oil

  Mercedes-Benz's approval for full-SAPS engine oils with extended drain intervals and higher performance than 229.3, for petrol and diesel passenger-car engines without a particulate filter.

• VW 502 00

  VW 502 00 — petrol engine oil

  VW's standard for petrol engine oils on a fixed drain interval, at full-SAPS level. Not for engines with a particulate filter.

• VW 505 00

  VW 505 00 — diesel engine oil

  VW's standard for passenger-car diesel engine oils without unit-injector injection, on a fixed drain interval.

• Renault RN0710

  Renault RN0710 — engine oil for DPF diesels

  Renault's oil approval for passenger-car diesel engines, including those with a particulate filter, with in-house wear protection requirements.

• FCA 9.55535-M2

  FCA 9.55535-M2 — engine oil

  A fluid specification from the Fiat Chrysler — today Stellantis — 9.55535 / 955535 series; the letter-and-digit suffix identifies the performance level and viscosity grade.