Mobil 1 x1 5W-30

Specifications

Brand

Mobil (ExxonMobil)

Category

Engine oils

Viscosity

SAE 5W-30

Manufacturer code

2015101010V5

Availability

On order

Approved for

• Volkswagen
• Ford
• Fiat
• General Motors
• Chrysler
• ACEA
• API
• SAE
• ILSAC

Compatible vehicles

Chrysler

300, Voyager/Grand Voyager

Fiat

Ducato

Jeep

Cherokee, Compass, Grand Cherokee, Wrangler

Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.

Typical characteristics

Manufacturer's description

Mobil 1 x1 5W-30 is an advanced-performance full-synthetic engine oil from Mobil 1, the world's leading synthetic engine oil brand. It is formulated with a proprietary blend of high-performance synthetic base stocks and a precisely balanced additive system, designed to meet or exceed the demanding ILSAC GF-7 and API SQ Resource Conserving standards while helping the engine run like new. The oil is recommended for many modern passenger car, SUV and light van engines, including high-performance turbocharged and supercharged gasoline and diesel multi-valve fuel-injected units. It is appropriate for Ford, General Motors, Fiat Chrysler Automobiles, and Japanese and Korean vehicles specifying an SAE 5W-30 viscosity grade, and is especially suitable for extreme operating conditions where conventional oils may not perform as well. It is not recommended for 2-cycle or aviation engines unless specifically approved by the manufacturer. Key benefits include excellent lubrication and wear protection, LSPI and timing-chain wear protection under ILSAC GF-6/API SP, protection for exhaust after-treatment systems such as particulate filters (GPF, DPF) and catalytic converters, and extended turbocharger and engine life through deposit and sludge control. The product carries GM dexos1:GEN3 licensing and VW VWC 53034 approval, and meets or exceeds numerous Ford, GM, FIAT, Chrysler, ACEA and API specifications including ACEA C2, ACEA A5/B5, API SP and API SQ Resource Conserving.

Applications

• Mobil 1 x1 5W-30 Advanced Full Synthetic Engine Oil is recommended for many types of modern engines found in passenger cars, SUVs, and light vans, including high-performance turbo-charged, supercharged gasoline and Diesel multi-valve fuel injected engines. It is appropriate for Ford, General Motors, Fiat Chrysler Automobiles, and Japanese and Korean vehicles where a SAE 5W-30 viscosity grade and any of its service classifications or builder approvals are recommended. • Mobil 1 x1 5W-30 is especially suitable for extreme conditions where conventional oil often may not perform. • Mobil 1 x1 5W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer. Always consult your owner's manual for the manufacturer's recommendations.

Performance & benefits

• Mobil 1 x1 5W-30 advanced performance synthetic engine oil is made with a proprietary blend of high performance synthetic basestocks fortified with a precisely balanced component system. The 5W-30 viscosity grade is a recommended viscosity grade for many new cars. Mobil 1 x1 5W-30 is uniquely designed to help provide unsurpassed levels of performance, cleaning power and engine protection, while meeting the demanding ILSAC GF-7 performance standards. • Excellent overall lubrication and wear protection performance for many driving styles • Meets ILSAC GF-6 and API SP standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to maintain your fuel economy • Helps protect exhaust gas after-treatment systems, including Particle Filters (GPF, DPF) and Catalytic Converters (CAT) designed to limit engine emissions • Helps extend turbocharger and engine life by working to prevent damaging deposits and sludge buildup • Provides excellent internal engine heat protection and low temperature protection

Standards & approvals

• GM dexos1 Gen 3

  GM dexos1 Gen 3, licensed

  GM's current petrol engine oil specification, third generation: protection against low-speed pre-ignition (LSPI), turbocharger cleanliness and fuel economy. "Licensed" means the product carries the registered dexos mark.

• Ford WSS-M2C946-B1

  Ford WSS-M2C946-B1 — engine oil specification

  A Ford passenger-car engine oil specification, a later issue of the M2C946 family, called for at the viscosity grade Ford specifies for the engine concerned.Source

• Ford WSS-M2C929-A

  Ford WSS-M2C929-A — engine oil specification

  A Ford passenger-car engine oil specification, called for at the viscosity grade Ford specifies for the engine concerned.Source

• Ford WSS-M2C946-A

  Ford WSS-M2C946-A — engine oil

  A Ford passenger-car engine oil specification adding in-house fuel economy requirements to the ACEA level.

• GM 6094M

  GM 6094M — engine oil (obsolete)

  GM's old passenger-car engine oil specification, withdrawn once the modern API categories and the dexos specifications arrived.

• GM 4718M

  GM 4718M — engine oil

  An old GM passenger-car engine oil specification, superseded by the dexos1 family.Source

• FCA 9.55535-CR1

  Fiat 9.55535-CR1 — engine oil

  A fluid specification from the Fiat Chrysler — today Stellantis — 9.55535 / 955535 series; the letter-and-digit suffix identifies the performance level and viscosity grade.

• API SN PLUS

  Petrol engine oil, API SN PLUS performance level

  API's service category for spark-ignition engines. Current category.Source

• API SN

  Petrol engine oil, API SN performance level

  API's service category for spark-ignition engines. Current category.Source

• ILSAC GF-6A

  ILSAC GF-6A petrol engine oil

  The ILSAC level that added protection against low-speed pre-ignition and timing chain wear. The A variant covers the ordinary viscosity grades, from SAE 0W-20 upwards.

• Ford WSS-M2C961-A1

  Ford WSS-M2C961-A1 — engine oil specification

  A Ford low-viscosity engine oil specification for turbocharged GDI engines, a later issue of M2C961-A, called for at the viscosity grade Ford specifies for the engine concerned.Source

• API SP

  Petrol engine oil, API SP performance level

  API's service category for spark-ignition engines. Current category.Source

• Chrysler MS-6395

  Chrysler MS-6395 — engine oil

  The Chrysler specification for engine oils in its own passenger cars, called for at the viscosity grade the maker specifies.

• Chrysler MS-13340

  Chrysler MS-13340 — engine oil

  A Chrysler passenger-car engine oil specification.

• ACEA C2

  ACEA C2 oil sequence

  ACEA's sequence for catalyst-compatible, low-SAPS engines.Source

• ACEA A5/B5

  ACEA A5/B5 oil sequence

  ACEA's sequence for petrol and light-duty diesel engines.Source

• API SQ

  Petrol engine oil, API SQ performance level

  API's service category for spark-ignition engines. Current category.Source

• ILSAC GF-7A

  ILSAC GF-7A petrol engine oil

  The newest ILSAC level for petrol engine oils, tightening the oxidation, deposit and LSPI requirements of GF-6A.

Fits

• Cars & light vehicles