Mobil Delvac Ultra 5W-30 Fuel Efficient Plus
Fuel-efficient synthetic oil for the latest trucks and buses, API FA-4, Volvo VDS-5
SAE 5W-30
Derived from the vehicle makers' approvals this product meets. Check the specification your vehicle's manual requires.
| Property | Typical value | Method |
|---|---|---|
| Appearance | Bright & Clear | |
| Density @15°Cg/cm³ | 0.856 | ASTM D 4052 |
| Kinematic viscosity @100°Cmm²/s (cSt) | 9.9 | ASTM D 445 |
| Viscosity index | 155 | ASTM D 2270 |
| Flash point COC°C | > 220 | ASTM D 92 |
| TBNmgKOH/g | 10 | ASTM D 2896 |
| CCS at -30°CmPa*s | 5800 | ASTM D5293 |
| Pour point°C | -42 | ASTM D 97 |
We email you this product's sheets in a single archive.

PETRONAS Urania Elite Eco 5W-30 is a fully synthetic heavy-duty engine oil with improved fuel economy and extended service-interval capabilities. Formulated with StrongTech™ technology, it forms a uniquely strong fluid film that protects the engine, retains performance and keeps trucks running and available for longer periods, helping to reduce total cost of ownership. It is a low-SAPS oil suitable for Euro VI and Euro VId heavy-duty diesel applications, including modern high-output, low-emission engines fitted with DPF, SCR, DOC and EGR systems. Approved to Volvo VDS-5 and Renault RLD-5, it was specifically developed for Volvo and Renault Euro VId engines produced from 2021 onwards. Better protection against oxidation, high-temperature viscosity loss and sludge build-up, together with excellent low-temperature circulation, provide more durability, efficiency and reliability. Benefits include extended drain intervals and engine life, up to 0.6% fuel-economy improvement versus a conventional 5W-30 meeting DTFR 15C110, outstanding DPF and DOC protection with a low-ash additive system and effective control of high soot loads. It meets API FA-4, SN, SN Plus, ACEA F01 and JASO DH-2, with approvals for DTFR 15C130 (backward compatible with MB 228.61), Mack EOS-5, Renault RLD-5 and Volvo VDS-5, and performance in line with Cummins CES 20087 and Detroit Diesel DFS93K223. It replaces Urania 5000 LS-FE 5W-30.
Diesel engine oil, API FA-4 performance level
API's service category for compression-ignition engines. Current category.Source
Petrol engine oil, API SN performance level
API's service category for spark-ignition engines. Current category.Source
Petrol engine oil, API SN PLUS performance level
API's service category for spark-ignition engines. Current category.Source
ACEA F01 — low-viscosity passenger-car diesel (withdrawn)
A short-lived ACEA sequence for low-viscosity, mid-SAPS passenger-car oils aimed at DPF-equipped diesel engines. It was dropped from the ACEA list and superseded by the C sequences.
JASO DH-2 — diesel engine oil
The Japanese standard for heavy-duty diesel engine oils in DPF-equipped engines, with sulphated ash capped so the filter does not clog.
Daimler Truck DTFR 15C130 (formerly MB 228.61) — low-SAPS, low-viscosity engine oil
Daimler Truck's most recent low-SAPS level, at reduced viscosity for fuel economy on Euro VI engines. Daimler Truck renumbered the MB-Approval sheets into the DTFR series; MB 228.61 and DTFR 15C130 are the same requirement.Source
Cummins' most recent engine oil specification, adding oxidation stability and aftertreatment protection requirements.
Mack's newer engine oil specification, adding oxidation stability and aeration requirements to EOS-4.5.
DFS 93K223 — FA-4 low-viscosity engine oil
Detroit's fluid specification for API FA-4 low-viscosity oils, for extended drain intervals in GHG14/GHG17 engines.Source
Renault Trucks' most recent engine oil specification, tightening the oxidation and fuel economy requirements of RLD-3.
Mercedes-Benz low-SAPS, low-viscosity truck diesel engine oil
Mercedes-Benz's low-SAPS level at reduced viscosity for fuel economy on Euro VI truck engines. Daimler Truck now issues the same requirement as DTFR 15C130.Source
Volvo's most recent engine oil specification, for low-viscosity oils delivering fuel economy on the latest Euro VI engines.